test+docs: prepublish hardening from review (failure paths, doc hygiene)

Coverage:
- CF-002: demux skipped-bytes budget teardown test (268 MiB skip in-memory;
  a budgetless demux wedges in the 17th skip, the real one tears down) and
  the skip-hits-EOF arm (truncated oversized payload ends the loop).
- CF-001: retryable CONNECTION_CLOSED pinned for subscribe write failures
  in both stream modes and single-stream publish request-frame failures;
  non-retryable INTERNAL pinned for mid-publish failures in both modes
  (deterministic FailOnFlushN write half).
- Gateway: invoke_sink with with_deadline(None) completes a slow sink.

Docs:
- Fix broken intra-doc link on lib.rs's feature-gated gateway mention
  (rustdoc warned on default-feature builds).
- Re-point 40 src/ references from the old alknet mono-repo ADR numbering
  (049/050/052/065/070/074/092) to this crate's numbering
  (021/011/034/007/008/009/005); drop into_sub_streams references
  removed by ADR-035.

Verification: 565 default / 582 all-features (8 new), clippy -D warnings
on default/gateway/all-features/wasm32, fmt clean, rustdoc warning-free
on default and all-features, publish dry-run clean. Consumer-facing API
continuity 0.1.1 -> 0.2.0 verified by compiling an API-surface probe
against both versions.

src/channels/adapter.rs

@@ -552,4 +552,142 @@ mod tests {
             assert_eq!(buf, [i; 4], "channel A chunk {i} intact — no data loss");
         }
     }
+
+    /// CF-002 #1 — the skipped-bytes budget tears down a dribbling peer.
+    /// Sixteen back-to-back `TooLarge` headers each declare 16 MiB + 1 and
+    /// their payloads are genuinely on the wire (the demux must consume
+    /// every byte to reach the next header, so the test cannot avoid
+    /// moving ~268 MiB through the duplex). The 16th skip pushes the
+    /// cumulative total past the 256 MiB budget: a working demux tears
+    /// down and *stops reading there*, while a peer that keeps dribbling
+    /// (a 17th header parked mid-payload) must not wedge it. Without the
+    /// budget the demux blocks skipping the 17th payload forever and the
+    /// timeout fires.
+    #[tokio::test]
+    async fn demux_tears_down_after_cumulative_skipped_bytes_budget_exceeded() {
+        let oversized_len = super::super::wire::MAX_CHUNK_LEN as usize + 1;
+        let burst_count = 16;
+        let (client, server) = tokio::io::duplex(1024 * 1024);
+        let (server_read, server_write) = tokio::io::split(server);
+        let (mux_handle, mux_runner) = MuxRunner::new(Box::new(server_write));
+        let _mux_task = tokio::spawn(async move {
+            let _ = mux_runner.run().await;
+        });
+        let manager = ChannelManager::with_defaults(mux_handle, None);
+
+        let (_id, _send, _recv) = manager
+            .open_channel("alk/tty", "alice", None)
+            .await
+            .expect("open");
+
+        let demux_manager = manager.clone();
+        let demux_task = tokio::spawn(async move {
+            ChannelsAdapter::run_demux_loop_for_client(&demux_manager, Box::new(server_read), None)
+                .await;
+        });
+
+        // Writer task: 16 full oversized payloads (15 × ~16 MiB ≈ 240 MiB
+        // skip cleanly under the budget; the 16th crosses it), then a 17th
+        // header + partial payload — and park instead of finishing (the
+        // peer keeps dribbling, never EOFs).
+        let writer_task = tokio::spawn(async move {
+            use tokio::io::AsyncWriteExt;
+            let mut client_write = client;
+            let mut header = [0u8; 8];
+            let chunk = vec![0u8; 64 * 1024];
+            let full = oversized_len / chunk.len();
+            let tail = oversized_len % chunk.len();
+            for _ in 0..burst_count {
+                super::super::wire::write_header(1, oversized_len as u32, &mut header)
+                    .expect("write header");
+                client_write.write_all(&header).await.expect("write header");
+                for _ in 0..full {
+                    client_write.write_all(&chunk).await.expect("write payload");
+                }
+                if tail > 0 {
+                    client_write
+                        .write_all(&chunk[..tail])
+                        .await
+                        .expect("write payload tail");
+                }
+            }
+            // The budget is already blown by the 16th skip; this header is
+            // the dribble that a budgetless demux would park on forever.
+            super::super::wire::write_header(1, oversized_len as u32, &mut header)
+                .expect("write header");
+            client_write.write_all(&header).await.expect("write header");
+            client_write
+                .write_all(&chunk[..8192])
+                .await
+                .expect("write partial payload");
+            std::future::pending::<()>().await;
+        });
+
+        let demux_done =
+            tokio::time::timeout(std::time::Duration::from_secs(120), demux_task).await;
+        assert!(
+            demux_done.is_ok(),
+            "demux must tear down on the skipped-bytes budget, not block in the skip loop"
+        );
+        writer_task.abort();
+    }
+
+    /// CF-002 #2 — a skip that hits EOF mid-payload (peer declared more
+    /// bytes than it sent) ends the demux loop; nothing routes to the
+    /// channel and the loop does not spin back to header parsing on a
+    /// truncated stream.
+    #[tokio::test]
+    async fn demux_ends_when_oversized_payload_skip_hits_eof() {
+        let (client, server) = tokio::io::duplex(1024 * 1024);
+        let (server_read, server_write) = tokio::io::split(server);
+        let (mux_handle, mux_runner) = MuxRunner::new(Box::new(server_write));
+        let _mux_task = tokio::spawn(async move {
+            let _ = mux_runner.run().await;
+        });
+        let manager = ChannelManager::with_defaults(mux_handle, None);
+
+        let (_id, _send, mut recv) = manager
+            .open_channel("alk/tty", "alice", None)
+            .await
+            .expect("open");
+
+        let demux_manager = manager.clone();
+        let demux_task = tokio::spawn(async move {
+            ChannelsAdapter::run_demux_loop_for_client(&demux_manager, Box::new(server_read), None)
+                .await;
+        });
+
+        use tokio::io::AsyncWriteExt;
+        let oversized_len = super::super::wire::MAX_CHUNK_LEN as usize + 1;
+        let mut header = [0u8; 8];
+        super::super::wire::write_header(1, oversized_len as u32, &mut header).expect("header");
+        let mut client_write = client;
+        client_write.write_all(&header).await.expect("write header");
+        client_write
+            .write_all(&[0u8; 4096])
+            .await
+            .expect("write partial payload");
+        drop(client_write);
+
+        let demux_done = tokio::time::timeout(std::time::Duration::from_secs(10), demux_task).await;
+        assert!(
+            demux_done.is_ok(),
+            "demux must end when the skip hits EOF instead of looping"
+        );
+
+        // The oversized chunk was never routed — nothing to assert on the
+        // channel beyond the loop ending; reading would surface EOF since
+        // the demux dropped its sender without delivering a payload.
+        use tokio::io::AsyncReadExt;
+        let mut buf = [0u8; 4];
+        let read = tokio::time::timeout(
+            std::time::Duration::from_millis(500),
+            recv.read_exact(&mut buf),
+        )
+        .await;
+        assert!(
+            read.is_err() || read.unwrap().is_err(),
+            "no payload must arrive after the truncated skip"
+        );
+    }
 }

src/channels/source.rs

@@ -4,7 +4,7 @@
 //!
 //! The handler for a channel receives a `Connection` constructed via
 //! `Connection::from_source(ChannelBidiStreamSource, alpn)`. The
-//! handler calls `accept_bi()` once (yield-once per channel, ADR-065)
+//! handler calls `accept_bi()` once (yield-once per channel, ADR-007)
 //! and gets a `BiStream` — identical to how it works on a top-level
 //! QUIC connection. The `BiStream` is the reassembled read half joined
 //! to the mux write half via `BiStream::from_joined`.
@@ -25,8 +25,8 @@ use crate::core::types::{BiStream, BidiStreamSource, StreamError};
 ///
 /// The `BiStream` is constructed once, in [`ChannelBidiStreamSource::new`],
 /// and held in an `Option` — `accept_bi` takes it. This preserves the
-/// yield-once contract (ADR-065) and the "split never crosses a crate
+/// yield-once contract (ADR-007) and the "split never crosses a crate
-/// boundary as part of a constructor" rule (ADR-092) — the join happens
+/// boundary as part of a constructor" rule (ADR-009) — the join happens
 /// here, in the `BidiStreamSource` impl, not per-handler.
 pub struct ChannelBidiStreamSource {
     stream: Mutex<Option<BiStream>>,
@@ -65,9 +65,9 @@ impl BidiStreamSource for ChannelBidiStreamSource {
 
     /// `code`/`reason` are ignored: a single channel has no
     /// QUIC-shaped application-level close codes. The drop is the
-    /// close (ADR-065 §"Negative"). The `_` prefix is intentional —
+    /// close (ADR-007 §"Negative"). The `_` prefix is intentional —
     /// the signature matches the public `Connection::close` API
-    /// (ADR-070 §"REQ-CORE-02").
+    /// (ADR-008 §"REQ-CORE-02").
     fn close(&self, _code: u32, _reason: &str) {
         let _ = self.stream.lock().take();
     }

src/channels/wire.rs

@@ -23,7 +23,7 @@ use thiserror::Error;
 pub const CHUNK_HEADER_LEN: usize = 8;
 
 /// The maximum chunk payload length (16 MiB, matching TTY's cap —
-/// ADR-052 §5). A chunk with `length > MAX_CHUNK_LEN` returns
+/// ADR-034). A chunk with `length > MAX_CHUNK_LEN` returns
 /// [`ChunkError::TooLarge`] and does not corrupt the stream — the demux
 /// drops the chunk and continues. The header is always exactly 8 bytes,
 /// so the demux can always resync by reading the next 8-byte header.

src/client/from_call.rs

@@ -411,7 +411,7 @@ fn make_forwarding_handler(connection: Arc<CallConnection>, remote_name: String)
 /// leaf: on invocation, calls `CallConnection::subscribe_with_payload()` and
 /// forwards the remote stream end-to-end. Each `call.responded` from the
 /// remote becomes a stream item, `call.completed` ends the stream, and
-/// `call.aborted` drops it (ADR-049 §8). No truncation, no first-value
+/// `call.aborted` drops it (ADR-021 §8). No truncation, no first-value
 /// fallback.
 ///
 /// `forwarded_for` is populated from `context.identity` (ADR-032 §3), exactly

src/core/types.rs

@@ -227,14 +227,14 @@ pub trait ProtocolHandler: Send + Sync + 'static {
     async fn handle(&self, connection: Connection, auth: &AuthContext) -> Result<(), HandlerError>;
 }
 
-// --- BiStream: the handler leaf (ADR-092) ---------------------------------
+// --- BiStream: the handler leaf (ADR-009) ---------------------------------
 
 /// Internal helper trait — the union of `AsyncRead + AsyncWrite + Send`.
 /// Not public; exists only to give `BiStream` a single boxed field.
 trait AsyncReadWrite: AsyncRead + AsyncWrite + Send {}
 impl<T: AsyncRead + AsyncWrite + Send> AsyncReadWrite for T {}
 
-/// The handler leaf — a bidirectional byte stream (ADR-092).
+/// The handler leaf — a bidirectional byte stream (ADR-005, ADR-009).
 ///
 /// `accept_bi`/`open_bi` return a `BiStream`, not a split
 /// `(SendStream, RecvStream)` pair. Handlers that want the split halves call
@@ -316,7 +316,7 @@ impl AsyncWrite for BiStream {
     }
 }
 
-// --- SendStream / RecvStream: thin newtypes (ADR-092) ---------------------
+// --- SendStream / RecvStream: thin newtypes (ADR-009) ---------------------
 
 pub struct SendStream {
     inner: Box<dyn AsyncWrite + Send + Unpin>,
@@ -327,10 +327,11 @@ pub struct RecvStream {
 }
 
 impl SendStream {
-    /// Box a write half into the thin `SendStream` newtype. Used by
+    /// Box a write half into the thin `SendStream` newtype. Used by tests
-    /// `into_sub_streams()` (ADR-074) and the channels reassembly path.
+    /// and any consumer that holds pre-split halves (the channels layer
-    /// Not a constructor that feeds `Connection` — the split never crosses
+    /// has its own `MpscSendStream`; `into_sub_streams()` was removed by
-    /// a crate boundary as part of a constructor (ADR-092).
+    /// ADR-035). Not a constructor that feeds `Connection` — the split
+    /// never crosses a crate boundary as part of a constructor (ADR-009).
     pub fn from_stream(stream: impl AsyncWrite + Send + Unpin + 'static) -> Self {
         Self {
             inner: Box::new(stream),
@@ -339,10 +340,11 @@ impl SendStream {
 }
 
 impl RecvStream {
-    /// Box a read half into the thin `RecvStream` newtype. Used by
+    /// Box a read half into the thin `RecvStream` newtype. Used by tests
-    /// `into_sub_streams()` (ADR-074) and the channels reassembly path.
+    /// and any consumer that holds pre-split halves (the channels layer
-    /// Not a constructor that feeds `Connection` — the split never crosses
+    /// has its own `MpscRecvStream`; `into_sub_streams()` was removed by
-    /// a crate boundary as part of a constructor (ADR-092).
+    /// ADR-035). Not a constructor that feeds `Connection` — the split
+    /// never crosses a crate boundary as part of a constructor (ADR-009).
     pub fn from_stream(stream: impl AsyncRead + Send + Unpin + 'static) -> Self {
         Self {
             inner: Box::new(stream),
@@ -386,15 +388,15 @@ impl AsyncRead for RecvStream {
 
 /// Yield bidirectional streams to a `Connection`. Downstream crates implement
 /// this trait to add connection shapes (channels, a future transport, a test
-/// double beyond the single-stream case) without editing core. See ADR-070
+/// double beyond the single-stream case) without editing core. See ADR-008
-/// for the full rationale and ADR-065 for the yield-once contract the
+/// for the full rationale and ADR-007 for the yield-once contract the
 /// `StreamBidiStreamSource` impl preserves. The return type is `BiStream`
-/// (ADR-092) — the join happens once, in the impl, not per-handler.
+/// (ADR-009) — the join happens once, in the impl, not per-handler.
 #[async_trait]
 pub trait BidiStreamSource: Send + Sync + 'static {
     /// Yield the next bidirectional stream this connection provides.
     ///
-    /// Transport semantics (carried from ADR-065):
+    /// Transport semantics (carried from ADR-007):
     /// - QUIC (quinn/iroh): returns a new bidi stream on each call,
     ///   `ConnectionClosed` when the underlying connection closes.
     /// - Single-stream (TCP+TLS, SSH channel, WebTransport stream, wasm):
@@ -407,7 +409,7 @@ pub trait BidiStreamSource: Send + Sync + 'static {
     /// Open a bidirectional stream to the peer.
     ///
     /// Single-stream sources return `StreamClosed` (a single stream cannot
-    /// open new application streams — ADR-065). QUIC and channels sources
+    /// open new application streams — ADR-007). QUIC and channels sources
     /// open new streams.
     async fn open_bi(&self) -> Result<BiStream, StreamError>;
 
@@ -416,13 +418,13 @@ pub trait BidiStreamSource: Send + Sync + 'static {
 
     /// Close the connection. The `code`/`reason` args are QUIC application-
     /// level close codes; non-QUIC sources ignore them (the drop is the
-    /// close — ADR-065 §"Negative"). See ADR-070 §"REQ-CORE-02" for the
+    /// close — ADR-007 §"Negative"). See ADR-008 §"REQ-CORE-02" for the
     /// rationale for keeping the QUIC-shaped signature on the trait.
     fn close(&self, code: u32, reason: &str);
 }
 
 /// Single-stream `BidiStreamSource` (TCP+TLS, SSH channel, WebTransport
-/// stream, wasm stream — ADR-065). Crate-private; constructed via
+/// stream, wasm stream — ADR-007). Crate-private; constructed via
 /// `Connection::from_bidi`. `accept_bi` yields the underlying `BiStream`
 /// once, then `ConnectionClosed`; `open_bi` returns `StreamClosed`.
 struct StreamBidiStreamSource {
@@ -449,9 +451,9 @@ impl BidiStreamSource for StreamBidiStreamSource {
     }
 
     /// `code`/`reason` are ignored: a single stream has no QUIC-shaped
-    /// application-level close codes. The drop is the close (ADR-065
+    /// application-level close codes. The drop is the close (ADR-007
     /// §"Negative"). The `_` prefix is intentional — the signature matches
-    /// the public `Connection::close` API (ADR-070 §"REQ-CORE-02").
+    /// the public `Connection::close` API (ADR-008 §"REQ-CORE-02").
     fn close(&self, _code: u32, _reason: &str) {
         let _ = self.stream.lock().unwrap_or_else(|e| e.into_inner()).take();
     }
@@ -467,11 +469,11 @@ impl Connection {
     /// Construct a `Connection` from a single bidirectional stream (e.g.
     /// `tokio::io::DuplexStream`, `TlsStream<TcpStream>`,
     /// `russh::Channel::into_stream()`). The stream is wrapped in a
-    /// `BiStream` (ADR-092) and yielded by `accept_bi` once, then
+    /// `BiStream` (ADR-009) and yielded by `accept_bi` once, then
     /// `ConnectionClosed`. `open_bi` returns `StreamClosed` (a single
-    /// stream can't open new application streams — ADR-065).
+    /// stream can't open new application streams — ADR-007).
     ///
-    /// This is the only public stream constructor (ADR-092): the split
+    /// This is the only public stream constructor (ADR-009): the split
     /// never crosses a crate boundary as part of a constructor. Handlers
     /// that want the split halves call `tokio::io::split(&mut *stream)` on
     /// the `BiStream` they receive from `accept_bi`.
@@ -492,7 +494,7 @@ impl Connection {
 
     /// Construct from a caller-supplied `BidiStreamSource` impl. The
     /// extension point for downstream crates — implement the trait and
-    /// construct a `Connection` from it without editing core. See ADR-070.
+    /// construct a `Connection` from it without editing core. See ADR-008.
     pub fn from_source(source: impl BidiStreamSource, alpn: Vec<u8>) -> Self {
         Self {
             source: Box::new(source),
@@ -514,7 +516,7 @@ impl Connection {
     /// Handlers that loop `accept_bi` (e.g. `TtyAdapter`) get one session
     /// per single-stream connection; handlers that call once (e.g.
     /// `HttpAdapter`) get the stream directly. Both are correct. The
-    /// return type is `BiStream` (ADR-092); handlers that want the split
+    /// return type is `BiStream` (ADR-009); handlers that want the split
     /// halves call `tokio::io::split` on the `BiStream`.
     pub async fn accept_bi(&self) -> Result<BiStream, StreamError> {
         self.source.accept_bi().await
@@ -656,7 +658,7 @@ mod tests {
     /// `tokio::io::sink()` + `tokio::io::empty()`: reads yield EOF
     /// immediately (zero bytes), writes discard. Exists because
     /// `Connection::from_bidi` requires a single value that implements
-    /// both traits (ADR-092). Used only to construct a `Connection` for
+    /// both traits (ADR-009). Used only to construct a `Connection` for
     /// tests that exercise `Connection`-level state (alpn, addr, identity)
     /// without ever reading or writing the stream.
     pub(crate) struct SinkEmpty;

src/gateway/dispatch.rs

@@ -527,6 +527,38 @@ mod tests {
         );
     }
 
+    #[tokio::test]
+    async fn invoke_sink_with_no_deadline_completes_a_slow_sink_handler() {
+        let mut registry = OperationRegistry::new();
+        registry
+            .register(HandlerRegistration::new(
+                spec("slow/sink", Visibility::External, OperationType::Pub),
+                HandlerKind::Sink(make_sink_handler(|_input, ctx, mut chunks| async move {
+                    while let Some(chunk) = chunks.next().await {
+                        let _ = chunk;
+                    }
+                    tokio::time::sleep(Duration::from_millis(80)).await;
+                    ResponseEnvelope::ok(ctx.request_id, serde_json::json!({}))
+                })),
+                OperationProvenance::Local,
+                None,
+                None,
+                Capabilities::new(),
+            ))
+            .unwrap();
+        let dispatch = GatewayDispatch::new(Arc::new(registry)).with_deadline(None);
+        let chunks: crate::registry::registration::PublishStream = Box::pin(futures::stream::iter(
+            vec![Ok(serde_json::json!({ "n": 1 }))],
+        ));
+        let envelope = dispatch
+            .invoke_sink(None, "/slow/sink", serde_json::json!({}), chunks)
+            .await;
+        assert!(
+            envelope.result.is_ok(),
+            "a no-deadline spine must not time out a slow sink, got {envelope:?}"
+        );
+    }
+
     #[tokio::test]
     async fn streaming_sub_op_streams_envelopes() {
         let mut registry = OperationRegistry::new();

src/lib.rs

@@ -17,7 +17,7 @@
 //!   going forward.
 //! - **Registry** ([`registry`]): operation specs, context, dispatch, and
 //!   the operation registry — the call half's dispatch core.
-//! - **Gateway** ([`gateway`], feature `gateway`): the transport-neutral
+//! - **Gateway** (module `gateway`, feature `gateway`): the transport-neutral
 //!   dispatch spine and `services/schema` disclosure guard — the
 //!   deadline-bounded, re-rooted-context invoke surface for HTTP
 //!   gateways, hub relays, and other transport front-ends (ADR-048).

src/protocol/connection.rs

@@ -213,7 +213,7 @@ impl CallConnection {
             }
         };
 
-        // `open_bi` returns a `BiStream` (ADR-092); split it into halves for
+        // `open_bi` returns a `BiStream` (ADR-009); split it into halves for
         // the call protocol's separate write (request) and read (response)
         // pumps. The split is the stdlib idiom; no per-handler wrapper.
         let stream = match connection.open_bi().await {
@@ -337,7 +337,7 @@ impl CallConnection {
             }
         };
 
-        // `open_bi` returns a `BiStream` (ADR-092); split for the separate
+        // `open_bi` returns a `BiStream` (ADR-009); split for the separate
         // write (request) and read (subscription events) pumps.
         let stream = match connection.open_bi().await {
             Ok(s) => s,
@@ -600,7 +600,7 @@ impl CallConnection {
             .connection
             .as_ref()
             .ok_or_else(|| "no underlying connection (overlay-only)".to_string())?;
-        // `open_bi` returns a `BiStream` (ADR-092). We only need the write
+        // `open_bi` returns a `BiStream` (ADR-009). We only need the write
         // half to send the envelope; split and drop the read half.
         let stream = connection
             .open_bi()
@@ -1938,6 +1938,39 @@ mod tests {
         crate::core::types::BiStream::from_joined(read_end, BrokenWrite)
     }
 
+    /// AsyncWrite whose writes succeed but whose Nth `poll_flush` fails.
+    /// `FrameFramedWriter::write_frame` flushes exactly once per frame, so
+    /// `remaining_ok_flushes = k` lets frames 1..=k land and fails inside
+    /// frame k+1 — a deterministic mid-stream write failure.
+    struct FailOnFlushN {
+        remaining_ok_flushes: std::sync::atomic::AtomicUsize,
+    }
+    impl AsyncWrite for FailOnFlushN {
+        fn poll_write(
+            self: Pin<&mut Self>,
+            _cx: &mut Context<'_>,
+            buf: &[u8],
+        ) -> Poll<std::io::Result<usize>> {
+            Poll::Ready(Ok(buf.len()))
+        }
+        fn poll_flush(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<std::io::Result<()>> {
+            let prev = self
+                .remaining_ok_flushes
+                .fetch_sub(1, std::sync::atomic::Ordering::SeqCst);
+            if prev == 0 {
+                Poll::Ready(Err(std::io::Error::new(
+                    std::io::ErrorKind::BrokenPipe,
+                    "mux dead",
+                )))
+            } else {
+                Poll::Ready(Ok(()))
+            }
+        }
+        fn poll_shutdown(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<std::io::Result<()>> {
+            Poll::Ready(Ok(()))
+        }
+    }
+
     #[tokio::test]
     async fn single_stream_call_write_failure_is_retryable_connection_closed() {
         let bi_stream = broken_write_bi_stream();
@@ -2045,6 +2078,175 @@ mod tests {
         assert!(err.retryable);
     }
 
+    #[tokio::test]
+    async fn single_stream_subscribe_write_failure_is_retryable_connection_closed() {
+        use futures::stream::StreamExt;
+
+        let bi_stream = broken_write_bi_stream();
+        let (writer, reader) = split_single_stream(bi_stream);
+        let conn = CallConnection::new_single_stream(stub_connection(), writer);
+        drop(reader);
+
+        let mut stream = conn.subscribe("test/events", serde_json::json!({})).await;
+        let item = stream.next().await.unwrap();
+        match item.result {
+            Err(e) => {
+                assert_eq!(e.code, "CONNECTION_CLOSED");
+                assert!(e.retryable);
+            }
+            other => panic!("expected retryable CONNECTION_CLOSED, got {other:?}"),
+        }
+        assert!(stream.next().await.is_none());
+    }
+
+    #[tokio::test]
+    async fn multi_stream_subscribe_write_failure_is_retryable_connection_closed() {
+        use crate::core::types::StreamError;
+        use crate::core::types::{BiStream, BidiStreamSource, Connection};
+        use futures::stream::StreamExt;
+        use std::net::SocketAddr;
+
+        struct OneBiStream(std::sync::Mutex<Option<crate::core::types::BiStream>>);
+        #[async_trait::async_trait]
+        impl BidiStreamSource for OneBiStream {
+            async fn accept_bi(&self) -> Result<BiStream, StreamError> {
+                Err(StreamError::ConnectionClosed)
+            }
+            async fn open_bi(&self) -> Result<BiStream, StreamError> {
+                let stream = self.0.lock().expect("open once").take();
+                stream.ok_or(StreamError::StreamClosed)
+            }
+            fn remote_addr(&self) -> Option<SocketAddr> {
+                None
+            }
+            fn close(&self, _code: u32, _reason: &str) {}
+        }
+
+        let conn = Connection::from_source(
+            OneBiStream(std::sync::Mutex::new(Some(broken_write_bi_stream()))),
+            b"alk/call".to_vec(),
+        );
+        let call_conn = CallConnection::new(conn);
+
+        let mut stream = call_conn
+            .subscribe("test/events", serde_json::json!({}))
+            .await;
+        let item = stream.next().await.unwrap();
+        match item.result {
+            Err(e) => {
+                assert_eq!(e.code, "CONNECTION_CLOSED");
+                assert!(e.retryable);
+            }
+            other => panic!("expected retryable CONNECTION_CLOSED, got {other:?}"),
+        }
+        assert!(stream.next().await.is_none());
+    }
+
+    #[tokio::test]
+    async fn single_stream_publish_request_frame_write_failure_is_retryable() {
+        let bi_stream = broken_write_bi_stream();
+        let (writer, reader) = split_single_stream(bi_stream);
+        let conn = CallConnection::new_single_stream(stub_connection(), writer);
+        drop(reader);
+
+        let response = conn
+            .publish(
+                "fs/upload",
+                serde_json::json!({}),
+                Box::pin(futures::stream::iter(vec![serde_json::json!({"c": 1})])),
+            )
+            .await;
+        match response.result {
+            Err(e) => {
+                // The request frame never landed — nothing delivered, retry safe.
+                assert_eq!(e.code, "CONNECTION_CLOSED");
+                assert!(e.retryable);
+            }
+            other => panic!("expected retryable CONNECTION_CLOSED, got {other:?}"),
+        }
+    }
+
+    #[tokio::test]
+    async fn single_stream_publish_midpublish_write_failure_stays_internal() {
+        // Flush succeeds for the request frame (1) + first chunk (2), then
+        // fails inside the second chunk — delivery is ambiguous from there.
+        let bi_stream = crate::core::types::BiStream::from_joined(
+            tokio::io::empty(),
+            FailOnFlushN {
+                remaining_ok_flushes: std::sync::atomic::AtomicUsize::new(2),
+            },
+        );
+        let (writer, reader) = split_single_stream(bi_stream);
+        let conn = CallConnection::new_single_stream(stub_connection(), writer);
+        drop(reader);
+
+        let chunks = vec![serde_json::json!({"c": 1}), serde_json::json!({"c": 2})];
+        let stream: Pin<Box<dyn Stream<Item = Value> + Send>> =
+            Box::pin(futures::stream::iter(chunks));
+        let response = conn
+            .publish("fs/upload", serde_json::json!({}), stream)
+            .await;
+        match response.result {
+            Err(e) => {
+                assert_eq!(e.code, "INTERNAL");
+                assert!(!e.retryable, "mid-publish failure must not be retryable");
+            }
+            other => panic!("expected non-retryable INTERNAL, got {other:?}"),
+        }
+    }
+
+    #[tokio::test]
+    async fn multi_stream_publish_midpublish_write_failure_stays_internal() {
+        use crate::core::types::StreamError;
+        use crate::core::types::{BiStream, BidiStreamSource, Connection};
+        use std::net::SocketAddr;
+
+        struct OneBiStream(std::sync::Mutex<Option<crate::core::types::BiStream>>);
+        #[async_trait::async_trait]
+        impl BidiStreamSource for OneBiStream {
+            async fn accept_bi(&self) -> Result<BiStream, StreamError> {
+                Err(StreamError::ConnectionClosed)
+            }
+            async fn open_bi(&self) -> Result<BiStream, StreamError> {
+                let stream = self.0.lock().expect("open once").take();
+                stream.ok_or(StreamError::StreamClosed)
+            }
+            fn remote_addr(&self) -> Option<SocketAddr> {
+                None
+            }
+            fn close(&self, _code: u32, _reason: &str) {}
+        }
+
+        let conn = Connection::from_source(
+            OneBiStream(std::sync::Mutex::new(Some(
+                crate::core::types::BiStream::from_joined(
+                    tokio::io::empty(),
+                    FailOnFlushN {
+                        remaining_ok_flushes: std::sync::atomic::AtomicUsize::new(2),
+                    },
+                ),
+            ))),
+            b"alk/call".to_vec(),
+        );
+        let call_conn = CallConnection::new(conn);
+
+        let chunks = vec![serde_json::json!({"c": 1}), serde_json::json!({"c": 2})];
+        let stream: Pin<Box<dyn Stream<Item = Value> + Send>> =
+            Box::pin(futures::stream::iter(chunks));
+        let response = call_conn
+            .publish("fs/upload", serde_json::json!({}), stream)
+            .await;
+        match response.result {
+            Err(e) => {
+                // The pump died on a *chunk* frame — the request landed,
+                // delivery is ambiguous, INTERNAL (non-retryable) is correct.
+                assert_eq!(e.code, "INTERNAL");
+                assert!(!e.retryable);
+            }
+            other => panic!("expected non-retryable INTERNAL, got {other:?}"),
+        }
+    }
+
     #[tokio::test]
     async fn shared_frame_writer_concurrent_writes_do_not_interleave() {
         let (client_end, server_end) = tokio::io::duplex(64 * 1024);

src/protocol/dispatch.rs

@@ -382,7 +382,7 @@ impl Dispatcher {
         connection: Arc<CallConnection>,
         stream: crate::core::types::BiStream,
     ) {
-        // `stream` is a `BiStream` (ADR-092) — `AsyncRead + AsyncWrite + Send
+        // `stream` is a `BiStream` (ADR-009) — `AsyncRead + AsyncWrite + Send
         // + Unpin`. Split into the read and write halves the call protocol's
         // frame reader/writer consume. The split is the stdlib idiom; no
         // per-handler wrapper.
@@ -441,7 +441,7 @@ impl Dispatcher {
     /// for `Ok`, `call.error` for `Err`). On natural stream end (the stream
     /// returned `None` without the last item being an `Err`), write a
     /// `call.completed` frame. An `Err` envelope is terminal — the stream
-    /// ends after it and we do NOT write `call.completed` (ADR-049 §6).
+    /// ends after it and we do NOT write `call.completed` (ADR-021 §6).
     ///
     /// If a frame write fails the pump stops early; the stream is dropped on
     /// return, releasing the handler's resources via `Drop` (ADR-016). A
@@ -1477,7 +1477,7 @@ mod tests {
         );
     }
 
-    // --- streaming dispatch branch (ADR-049 §6) ---------------------------
+    // --- streaming dispatch branch (ADR-021 §6) ---------------------------
 
     fn subscription_spec(name: &str, acl: AccessControl) -> OperationSpec {
         OperationSpec::new(

src/protocol/test_support.rs

@@ -1,6 +1,6 @@
 //! Shared test helpers for the call protocol's inline `#[cfg(test)]`
 //! modules. Kept here (not in each test module) so the `stub_connection()`
-//! shape is defined once — `Connection::from_stream` was removed (ADR-092)
+//! shape is defined once — `Connection::from_stream` was removed (ADR-009)
 //! and every test stub that previously called it now calls
 //! `Connection::from_bidi(SinkEmpty, ...)` via `sink_empty_connection()`.
 
@@ -15,7 +15,7 @@ use tokio::io::{AsyncRead, AsyncWrite, ReadBuf};
 /// A test-only `AsyncRead + AsyncWrite` pair equivalent to
 /// `tokio::io::sink() + tokio::io::empty()`: reads yield EOF immediately
 /// (zero bytes), writes discard. Exists because `Connection::from_bidi`
-/// (ADR-092 — the only public stream constructor, replacing
+/// (ADR-009 — the only public stream constructor, replacing
 /// `from_stream`) requires a single value that implements both traits.
 /// Used only to construct a `Connection` for tests that exercise
 /// `Connection`-level state (alpn, addr, identity, dispatcher run loop

src/registry/context.rs

@@ -33,7 +33,7 @@ pub struct OperationContext {
     pub internal: bool,
     /// `None` when no ownership provider is wired (backward compat —
     /// `check` falls back to static `Identity.resources` path). Wired by
-    /// the assembly layer via `CallAdapter`/`Dispatcher` (ADR-050).
+    /// the assembly layer via `CallAdapter`/`Dispatcher` (ADR-011).
     pub ownership: Option<Arc<dyn OwnershipProvider>>,
 }
 

src/registry/registration.rs

@@ -662,7 +662,7 @@ where
 /// shallow nested lookups (translated to `/a/b`).
 ///
 /// Returns `None` if the path is malformed, the field is missing, or the
-/// value at the path is not a string. Graceful — never panics (ADR-050 §2a):
+/// value at the path is not a string. Graceful — never panics (ADR-011 §2a):
 /// a missing field simply yields `resource_id: None`, and the caller's
 /// `AccessControl::check` decides whether to deny based on whether the spec
 /// requires a specific resource ID.