alknet/docs/architecture/crates/core/auth.md

status, last_updated

status	last_updated
draft	2026-06-27

Authentication

AuthContext, Identity, IdentityProvider, AuthToken, and the resolution flow.

See ADR-004 and ADR-011 for rationale.

AuthContext

Created by the endpoint for each incoming connection. Passed to ProtocolHandler::handle() as an immutable reference.

#[derive(Clone)]
pub struct AuthContext {
    /// The peer's authenticated identity, if resolved by the endpoint.
    /// None means the endpoint has no identity information for this connection.
    pub identity: Option<Identity>,

    /// The negotiated ALPN for this connection. Always present.
    pub alpn: Vec<u8>,

    /// The peer's remote address, if available. Informational (NAT/proxy).
    pub remote_addr: Option<SocketAddr>,

    /// SHA-256 fingerprint of the TLS client certificate, if presented.
    /// Set by the endpoint during TLS handshake. Handlers may use this for
    /// fingerprint-based auth even when IdentityProvider returns None.
    pub tls_client_fingerprint: Option<String>,
}

Construction by the endpoint

The endpoint constructs AuthContext from the QUIC connection:

1. alpn: From connection.alpn() — always present after TLS handshake.
2. remote_addr: From connection.remote_addr() — may be None for iroh connections.
3. tls_client_fingerprint: Extracted from the TLS session's client certificate, if one was presented.
4. identity: If a TLS client fingerprint is available, the endpoint calls IdentityProvider::resolve_from_fingerprint(). If it resolves, identity = Some(resolved). If not, identity = None.

Handler-level resolution

Handlers that require authentication extract protocol-specific credentials and call IdentityProvider inside handle(). When identity is resolved, the handler stores it on the Connection for observability:

// Example: CallAdapter extracting an AuthToken from the first frame
async fn handle(&self, connection: Connection, auth: &AuthContext) -> Result<(), HandlerError> {
    let identity = match &auth.identity {
        Some(id) => id.clone(),  // Endpoint already resolved identity
        None => {
            let stream = connection.accept_bi().await?;
            let token = extract_auth_token(stream).await?;
            self.identity_provider
                .resolve_from_token(&token)
                .ok_or(HandlerError::AuthRequired)?
        }
    };
    connection.set_identity(identity);  // Store for observability (OQ-11)
    // ... proceed with authenticated identity
}

Handlers that don't require authentication (e.g., DNS resolver, health check) can ignore auth.identity entirely and don't call set_identity.

Two Identity Scopes

There are two distinct identity scopes that must not be conflated:

Scope	Where it's set	Where it's stored	What it represents	Used for
Connection-level	Handler in handle()	Connection (via set_identity)	Who opened this QUIC connection	Observability, logging, audit
Per-request	CallAdapter per call.requested	OperationContext.identity	Who is making this specific call	ACL (ADR-015)

The connection-level identity is stable — set once when the handler resolves it. The per-request identity is dynamic — resolved per call.requested, potentially different across requests on the same connection (if different auth tokens are used). The per-request identity takes precedence for ACL on OperationContext; the connection-level identity is for observability only, not for ACL.

Connection exposes set_identity via interior mutability — the handler sets it once when resolved, the endpoint and observability layers read it. The identity is write-once-read-many.

AuthContext is Clone and immutable

• derive(Clone) allows handlers to clone AuthContext for per-stream or per-channel contexts.
• handle() receives &AuthContext — immutable. Handlers that resolve identity create local variables, they don't mutate the shared context. This prevents cross-contamination between streams on the same connection.

Identity

The authenticated peer identity. Carries authorization information.

#[derive(Debug, Clone, PartialEq)]
pub struct Identity {
    /// Stable logical identifier. On the fingerprint path, this is the
    /// `PeerEntry.peer_id` (stable across key rotation, ADR-030). On the
    /// API-key path, this is the key prefix (changes with the key — see
    /// "API keys vs peer entries" below). On the composition path, this
    /// is the `CompositionAuthority` label (ADR-022).
    pub id: String,

    /// Authorization scopes. e.g., ["relay:connect", "secrets:derive"]
    pub scopes: Vec<String>,

    /// Named resource lists. e.g., {"service": ["gitea", "registry"]}
    /// Populated from `PeerEntry.resources` on the fingerprint path
    /// (ADR-030), from `CompositionAuthority.resources` on the
    /// composition path (ADR-022), and empty on the API-key path.
    pub resources: HashMap<String, Vec<String>>,
}

This is the same structure as the reference implementation (alknet-main/crates/alknet-core/src/auth/identity.rs), minus the russh dependency. The id field is ALPN-agnostic:

• Ed25519 raw key / TLS cert auth (fingerprint path): the PeerEntry.peer_id (ADR-030) — a stable logical name like "worker-a", not the fingerprint. The fingerprint is the credential; the peer_id is the identity. Decoupling them means key rotation changes the credential but not the identity, so ACL entries and routing references stay stable.
• Bearer token auth (auth_token path): if the token is one credential path for a PeerEntry, Identity.id = peer_id (stable). If the token IS the identity (ApiKeyEntry), Identity.id = prefix (changes with the key). See "Credential Types" below.
• Composition path: the CompositionAuthority label (ADR-022) — e.g., "agent-chat".

Credential Types

The alknet auth model has three credential types. A PeerEntry can use any combination — all resolve to the same peer_id:

Credential type	PeerEntry field	Fingerprint format	Trust model
Ed25519 raw key (RFC 7250)	fingerprints[i]	ed25519:<hex of 32-byte pub key>	Fingerprint IS the trust anchor (no CA)
X.509 cert	fingerprints[i]	SHA256:<hex of DER>	CA verification (WebPKI)
Bearer token (peer credential)	auth_token_hash	SHA-256 hash of token	Token hash match

Ed25519 fingerprints are normalized to ed25519:<hex> across quinn and iroh (ADR-030 §6) — the same key has the same fingerprint regardless of transport.

Bearer tokens have two paths:

• PeerEntry.auth_token_hash — the token is one credential path among several for a stable logical peer. Rotation = update the hash, peer_id stays stable.
• ApiKeyEntry (separate) — the token IS the identity. Rotation = new identity (new prefix). No stable logical id.

The distinction is whether the token needs a stable logical id across rotation (PeerEntry) or not (ApiKeyEntry). See ADR-030 §"Bearer tokens."

AuthToken

Opaque authentication token carried in protocol frames.

#[derive(Debug, Clone)]
pub struct AuthToken {
    pub raw: Vec<u8>,
}

Unchanged from the reference implementation. The handler that extracted it knows its encoding (UTF-8 string, binary token, etc.).

IdentityProvider

Trait for resolving credentials to identities. Implemented by ConfigIdentityProvider.

pub trait IdentityProvider: Send + Sync + 'static {
    fn resolve_from_fingerprint(&self, fingerprint: &str) -> Option<Identity>;
    fn resolve_from_token(&self, token: &AuthToken) -> Option<Identity>;
}

• resolve_from_fingerprint(): Used by the endpoint (TLS client cert) and by SSH (key fingerprint).
• resolve_from_token(): Used by call protocol (AuthToken in first frame) and HTTP (Bearer header).

Both methods return Option<Identity> — None means the credential is not recognized.

ConfigIdentityProvider

The default implementation. Resolves identities from DynamicConfig:

pub struct ConfigIdentityProvider {
    dynamic: Arc<ArcSwap<DynamicConfig>>,
}

The "Config" prefix indicates that identities are resolved from configuration (as opposed to a database or external service). This reads from ArcSwap<DynamicConfig>, which is hot-reloadable — not from StaticConfig. An alternative name would be DynamicConfigIdentityProvider to make this clearer, but ConfigIdentityProvider is consistent with the reference implementation and the naming is unlikely to cause confusion in practice.

How it resolves:

• Fingerprint: Look up in DynamicConfig::auth.peers for the matching PeerEntry (by any entry in fingerprints). If found and enabled, return Identity { id: peer.peer_id, scopes: peer.scopes, resources: peer.resources }. The Identity.id is the stable peer_id, not the fingerprint — key rotation changes the fingerprint but not the peer_id, so ACL entries and routing references stay stable (ADR-030).
• Token: Hash the token and look up in DynamicConfig::auth.peers for a matching auth_token_hash. If found, return Identity { id: peer.peer_id, ... } — the same peer_id as the fingerprint path. If no PeerEntry matches, fall through to ApiKeyEntry lookup by prefix match + SHA-256 hash. If found and not expired, return Identity { id: prefix, scopes: entry.scopes, resources: {} } — the token IS the identity, Identity.id is the key prefix.

See ADR-030 for the PeerEntry model, the multi-credential resolution, and the fingerprint normalization rationale.

Resource-scoped ACLs

Identity.resources is populated on two paths:

Path	Source of resources	Use case
PeerEntry resolution (fingerprint or auth_token)	PeerEntry.resources (ADR-030)	External authenticated callers with per-peer resource binding
Composition (CompositionAuthority::as_identity, ADR-015/022)	CompositionAuthority.resources	Internal composition calls with declared resource binding

ApiKeyEntry-resolved identities have empty resources — API keys grant scopes only. An OperationSpec that declares resource_type/resource_action returns FORBIDDEN when the caller authenticated via ApiKeyEntry, but succeeds when the caller authenticated via PeerEntry (fingerprint or auth_token) with matching resources.

Changes to DynamicConfig via ConfigReloadHandle are reflected immediately — ConfigIdentityProvider reads from ArcSwap on every call.

Fingerprint string format

tls_client_fingerprint and PeerEntry.fingerprints entries use a prefixed-hex format. The prefix identifies the key type; the body is the hex-encoded key material. AuthPolicy::resolve_identity_from_fingerprint scans peers for a matching fingerprints entry — no normalization — so the extractor and the operator config must use the same format.

Transport	Source	Format
iroh (direct or relay)	peer NodeId (Ed25519 public key)	ed25519:<lowercase hex of 32-byte pub key>
quinn (RFC 7250 raw key)	SPKI cert → extract raw Ed25519 pub key	ed25519:<lowercase hex of 32-byte pub key> (normalized — ADR-030 §6)
quinn (X.509)	leaf client cert DER	SHA256:<hex of SHA-256(cert_der)>

Ed25519 raw keys produce ed25519:<hex> regardless of transport (quinn or iroh) — the same key has the same fingerprint. X.509 certs produce SHA256:<hex of DER> — the DER hash, since X.509 doesn't have a "raw public key" form.

When no client cert is presented (the current default — server uses with_no_client_auth()), the fingerprint is None and identity remains unresolved at the endpoint layer. The CallClient TLS client-auth wiring (OQ-29, resolved) presents the client's Ed25519 key as a raw public key client cert so the server can extract the fingerprint.

Server-side client cert request

The quinn rustls::ServerConfig uses a custom AcceptAnyCertVerifier that requests client certs but does not require them and does not verify them against a CA. This is the "request-but-don't-require" mode: peers that present a cert (X.509 or RFC 7250 raw key) have their fingerprint extracted via peer_identity(); peers that don't present a cert connect normally with tls_client_fingerprint: None.

The verifier accepts any presented cert without CA verification because alknet's identity model is fingerprint-based, not PKI-based — the AuthPolicy::peers set is the trust anchor, not a root CA store. The cert bytes are extracted at the TLS layer and hashed to a fingerprint string; the fingerprint is then matched against the configured PeerEntry.fingerprint fields by IdentityProvider::resolve_from_fingerprint().

Resolution Flow

Endpoint-level (before handle())

QUIC connection arrives
  → TLS handshake (ALPN negotiation)
  → Extract TLS client certificate fingerprint (if presented)
  → If fingerprint present: IdentityProvider::resolve_from_fingerprint()
    → Some(identity): auth.identity = Some(identity)
    → None: auth.identity = None
  → Construct AuthContext { identity, alpn, remote_addr, tls_client_fingerprint }
  → Look up handler by alpn
  → tokio::spawn(handler.handle(connection, &auth))

Handler-level (inside handle())

Handler receives &AuthContext
  → If auth.identity is Some: use it (endpoint already resolved)
  → If auth.identity is None and handler requires auth:
    → Extract protocol-specific credential (AuthToken, SSH key, etc.)
    → Call IdentityProvider::resolve_from_token() or resolve_from_fingerprint()
    → If resolved: use the Identity
    → If not resolved: return HandlerError::AuthRequired
  → If handler doesn't require auth: proceed without identity

IdentityProvider Injection

Handlers need access to IdentityProvider to resolve credentials inside handle(). Since ProtocolHandler::handle() doesn't receive an IdentityProvider parameter, each handler must obtain it through constructor injection:

// Example: SshAdapter holds an Arc<dyn IdentityProvider>
pub struct SshAdapter {
    identity_provider: Arc<dyn IdentityProvider>,
    // ... other handler-specific state
}

#[async_trait]
impl ProtocolHandler for SshAdapter {
    fn alpn(&self) -> &'static [u8] { b"alknet/ssh" }

    async fn handle(&self, connection: Connection, auth: &AuthContext) -> Result<(), HandlerError> {
        let identity = match &auth.identity {
            Some(id) => id.clone(),
            None => {
                // Extract SSH key fingerprint, resolve via identity_provider
                let fingerprint = extract_ssh_fingerprint(&connection).await?;
                self.identity_provider
                    .resolve_from_fingerprint(&fingerprint)
                    .ok_or(HandlerError::AuthRequired)?
            }
        };
        // ...
    }
}

The CLI binary constructs each handler with Arc::clone(&identity_provider) and passes it when building the HandlerRegistry. This is the assembly pattern: the CLI (the only crate that depends on all handlers) wires dependencies together.

The endpoint's AlknetEndpoint also holds Arc<dyn IdentityProvider> for endpoint-level auth resolution (TLS client certificate fingerprints), but handlers don't receive it from the endpoint — they receive it at construction time from the CLI.

Handler	Credential source	Resolution method
SshAdapter	SSH public key handshake	resolve_from_fingerprint()
CallAdapter	AuthToken in first frame	resolve_from_token()
HttpAdapter	Authorization: Bearer header	resolve_from_token()
DnsAdapter	AuthToken in query labels	resolve_from_token()
GitAdapter	Signed push certificate	resolve_from_fingerprint()
SftpAdapter	SSH key (shares with SshAdapter)	resolve_from_fingerprint()

Key Differences from Reference Implementation

Aspect	Reference	New Model
Auth resolution	Inside SSH handler, before handle()	Hybrid: endpoint resolves TLS-level, handler resolves protocol-level
AuthContext type	None (just Arc<ArcSwap<DynamicConfig>> + IdentityProvider)	Explicit struct with optional fields
Identity.id	Always a fingerprint or API key prefix	Same, but ALPN-agnostic documentation
ConfigIdentityProvider	Depends on russh for PublicKey types	No russh dependency; fingerprints stored as strings
Credential phases	A–D phases in CredentialProvider	Two paths: fingerprint and token. No phases.

Design Decisions

Decision	ADR	Summary
Hybrid auth model	ADR-004	Endpoint resolves TLS-level, handler resolves protocol-level
AuthContext with optional Identity	ADR-011	Explicit None, not "partially authenticated"
AuthContext is immutable in handle()	ADR-011	Handlers create local variables for resolved identity
Two resolution paths	ADR-004	Fingerprint and token, not phased auth
Handler stores resolved identity on Connection	OQ-11 (resolved)	connection.set_identity() — write-once-read-many for observability
PeerEntry and Identity.id decoupling	ADR-030	authorized_fingerprints → peers: Vec<PeerEntry>; Identity.id = peer_id (stable), not fingerprint; key rotation changes fingerprint, not identity
CredentialStore repo trait	ADR-031	Second repo trait in core (alongside IdentityProvider); InMemoryCredentialStore default adapter
Storage boundary and repo/adapter pattern	ADR-033	Core defines traits + in-memory defaults; persistence adapters are separate crates

Open Questions

• OQ-29 (resolved): CallClient TLS client-auth — wire quinn client-auth (present Ed25519 key as raw public key client cert); key-type-aware server cert verification (raw key = fingerprint match, X.509 = CA verification); fingerprint normalization (ed25519: across quinn/iroh). See OQ-29 in open-questions.md.
• OQ-35 (dissolved): the "API key asymmetry" framing was wrong; PeerEntry supports multiple credential paths (fingerprints + auth_token_hash), ApiKeyEntry is for tokens that ARE the identity. See OQ-35 in open-questions.md.
• OQ-37 (open): X.509 outgoing-only case — the three auth types and how X.509 server identity fits the peer model. Not blocking the ADR-029 migration. See OQ-37 in open-questions.md.

Security Constraints

These are security-critical implementation requirements, not architectural decisions (the architecture is locked by the ADRs above). They are documented here so implementation agents don't miss them.

• Token entropy: generated alk_ tokens must have ≥128 bits of entropy. The prefix (first 8 chars) is for O(1) lookup and is not secret — it appears in logs by design. SHA-256 of the full token allows offline verification; this is safe only if the full token is high-entropy. The prefix alone must not be sufficient to authenticate.
• Config reload must be authenticated: a reload that adds an authorized fingerprint or API key grants access immediately (see config.md). The reload trigger must be local-only (SIGHUP, file watch) or an admin-scoped call protocol operation. A malicious reload is equivalent to root-level privilege grant.
• Connection-level identity is for observability only: Connection::set_identity stores the handler-resolved identity for logging/audit. Per-request identity (OperationContext.identity) takes precedence for ACL. See OQ-11.
• Cryptographic nonces use OsRng: AES-GCM IVs and any other cryptographic nonces must use OsRng (or equivalent CSPRNG), not rand::random(). IV reuse under the same key is catastrophic for GCM (authenticity breaks, two-time-pad on plaintext). The vault implementation (crates/alknet-vault/src/encryption.rs) must use OsRng for IV generation.
• Derived keys are zeroized on drop: cached derived keys (CachedKey) must derive Zeroize and ZeroizeOnDrop. When the cache evicts an entry (LRU) or the process exits without explicit lock(), derived private keys must not linger in freed heap memory. The cache must clear on drop, not just on explicit lock().
• No unwrap() or expect() outside tests: poisoned lock recovery uses unwrap_or_else(|e| e.into_inner()) or explicit error propagation. A panic in one vault operation must not brick the vault for all other operations.