alknet/docs/research/configuration.md

status, last_updated, phase

status	last_updated	phase
draft	2026-06-04	exploration

Configuration Architecture

Problem

Wraith's configuration is loaded once at startup and never changes. This has three specific failures:

1. No hot reload of authentication credentials. Adding or removing an authorized key requires restarting the server process. In a hub/spoke deployment where keys are managed via a database (see @alkdev/storage's peer_credentials table), the wraith process must be restarted every time a key is added, revoked, or rotated. This is operationally unacceptable for a production service.

2. No port forwarding access control. Any authenticated client can open a direct-tcpip channel to any destination. There is no policy governing which hosts, ports, or wraith-* control channels a client may access. This is a security gap — a compromised key grants unrestricted network access through the tunnel.

3. No structured configuration beyond CLI flags. ADR-011 chose programmatic-first configuration for the alpha. This was correct — it avoided cross-platform path issues and kept the API surface small. But as wraith moves toward publishable releases, operators need config files for reproducible deployments, and the NAPI layer needs programmatic reload capability that the current ServeOptions builder pattern doesn't support.

What's Not The Problem

• This does not propose depending on Honker, SQLite, or any specific data source at the wraith-core level. The core provides a reload mechanism; data sources plug in from outside.
• This does not propose file-watching (potential attack vector, unnecessary complexity). CLI usage loads config once at startup. Programmatic usage (NAPI, hub) calls reload explicitly.
• This does not replace the existing ServeOptions builder pattern. It generalizes it.

Analysis

Static vs Dynamic Configuration

Not all configuration should be reloadable. Transport-level settings (listen address, TLS certificates, host key) require socket/TLS renegotiation to change at runtime — effectively a restart. Auth and forwarding policy can change atomically without disrupting existing connections.

Category	Examples	Reloadable?
Transport	listen addr, TLS cert/key, iroh relay, stealth mode	No — requires bind change
Identity	host key, host key algorithm	No — requires SSH re-negotiation
Auth	authorized keys, cert authorities	Yes — next auth check picks up changes
Forwarding	allowed destinations, per-principal rules	Yes — next channel open picks up changes
Rate limits	max connections per IP, max auth attempts	Yes — next check picks up changes

The split is clean: anything that affects the SSH handshake or socket binding is static. Anything that's checked per-connection or per-channel is dynamic.

Current Architecture

ServeOptions (builder) → Server::new()
  ├─ Arc<server::Config>          (russh config, immutable)
  ├─ Arc<ServerAuthConfig>        (keys + CAs, immutable after load)
  ├─ Arc<ConnectionRateLimiter>   (mutable but not reloadable)
  └─ ServerHandler::new(auth_config, ...)

ServerHandler
  ├─ auth_config: Arc<ServerAuthConfig>  ← shared, immutable
  ├─ connection_limiter: Arc<ConnectionRateLimiter>
  ├─ outbound_proxy: Option<ProxyConfig>
  └─ (no forwarding policy field)

auth_publickey() reads from self.auth_config via Arc dereference. No path to update it.

Proposed Architecture

Replace Arc<ServerAuthConfig> with a reloadable provider:

StaticConfig (Arc, loaded once)
  ├─ transport mode, listen addr, TLS config, iroh config
  ├─ stealth, proxy
  ├─ host key
  └─ max_auth_attempts, max_connections_per_ip

DynamicConfig (Arc<ArcSwap<DynamicConfig>>, reloadable)
  ├─ auth: ServerAuthConfig
  ├─ forwarding: ForwardingPolicy
  └─ rate_limits: RateLimitConfig

ConfigReloadHandle (exposed to NAPI)
  └─ reload(DynamicConfig)

ArcSwap provides lock-free reads on the hot path. Every auth_publickey() and channel_open_direct_tcpip() call does an Arc dereference — zero cost compared to the current approach. Writes are atomic: store() swaps the pointer. Existing connections finish with their current config, new connections get the new config.

Forwarding Policy

Currently, channel_open_direct_tcpip in handler.rs spawns a proxy task for any destination. The only gate is authentication. A forwarding policy adds a check before the proxy spawn:

pub struct ForwardingPolicy {
    default: ForwardingAction,
    rules: Vec<ForwardingRule>,
}

pub struct ForwardingRule {
    target: TargetPattern,
    action: ForwardingAction,
    principals: Vec<String>,
}

pub enum ForwardingAction { Allow, Deny }
pub enum TargetPattern {
    Any,
    Host(String),
    Cidr(IpNetwork),
    PortRange(String, Range<u16>),
    WraithPrefix,
}

Rule evaluation: first match wins, default applies if no rule matches. This model maps to OpenSSH's AllowTcpForwarding + PermitOpen but is more expressive. It also maps to peer_credentials.metadata.scopes in @alkdev/storage — the hub can generate forwarding rules from stored scopes.

Rule ordering matters. A deny-then-allow pattern gives blocklist semantics. An allow-then-deny pattern gives allowlist semantics. Both are useful. The default determines the fallback.

Configuration File Format

ADR-011 chose "programmatic-first, no config file." This was correct for alpha. For publishable releases, a config file enables:

• Reproducible deployments (version-controlled config)
• Less verbose CLI invocations
• Separate files for static and dynamic config (only static needs to be in the config file; dynamic comes from the reload mechanism)

TOML is the idiomatic Rust choice. The config file covers static config only — the same fields as ServeOptions. Dynamic config (auth, forwarding) comes from the reload mechanism, not from the file. This preserves ADR-011's intent: the core doesn't know about the data source for auth keys, it just provides a place to put them.

[server]
transport = "tls"
listen = "0.0.0.0:443"
stealth = false
max_connections_per_ip = 5
max_auth_attempts = 3

[server.tls]
cert = "/etc/wraith/tls/cert.pem"
key = "/etc/wraith/tls/key.pem"

[server.iroh]
relay = "https://relay.alk.dev"

[auth]
host_key = "/etc/wraith/ssh/host_key"

[forwarding]
default = "deny"

[[forwarding.rules]]
target = "localhost:*"
action = "allow"

[[forwarding.rules]]
target = "wraith-*"
action = "allow"

[[forwarding.rules]]
target = "*:22"
action = "deny"

The [[forwarding.rules]] array syntax is TOML's array-of-tables pattern. Rules are evaluated in order; first match wins.

NAPI Reload API

The NAPI layer exposes the reload handle:

interface WraithServer {
  reloadAuth(auth: { authorizedKeys?: Buffer, certAuthority?: Buffer }): void;
  reloadForwarding(policy: ForwardingPolicyConfig): void;
  reloadAll(config: DynamicConfig): void;
}

interface ForwardingPolicyConfig {
  default: 'allow' | 'deny';
  rules: ForwardingRuleConfig[];
}

interface ForwardingRuleConfig {
  target: string;      // "localhost:*", "10.0.0.0/8:80", "wraith-*"
  action: 'allow' | 'deny';
  principals?: string[];  // default ["*"]
}

The hub calls server.reloadAuth(...) after writing to peer_credentials. The NAPI layer parses the key data and constructs a new DynamicConfig, then calls the ConfigReloadHandle.

Client Configuration

Client configuration is almost entirely static (which server to connect to, which key to use). The only potential dynamic config is key rotation, which is less urgent because clients don't serve. For now, client configuration stays as ConnectOptions — no ArcSwap needed.

A config file for client connections could define named profiles:

[profiles.production]
server = "hub.alk.dev:443"
transport = "tls"
identity = "/home/user/.ssh/id_ed25519"

[profiles.staging]
server = "staging.alk.dev:22"
transport = "tcp"
identity = "/home/user/.ssh/staging_key"

This is a convenience layer on top of ConnectOptions, not a replacement.

CLI vs Programmatic Behavior

Interface	Static config	Dynamic config	Reload mechanism
CLI	Flags + optional --config file	Loaded at startup from --authorized-keys	None (restart to change)
Core Rust	StaticConfig struct	ArcSwap<DynamicConfig>	ConfigReloadHandle::reload()
NAPI	serve() options	Same ArcSwap	server.reloadAuth(), server.reloadForwarding()

The CLI doesn't need a reload mechanism. When you're running wraith from the command line, restarting is fine. The reload mechanism exists for programmatic consumers that manage credentials in a database.

Multi-Transport Listeners

A host may want to accept connections on multiple transports simultaneously:

• TCP on port 22 (simple, direct SSH)
• TLS on port 443 (stealth mode, corporate firewalls)
• iroh QUIC (P2P, no port forwarding needed)
• WebTransport on port 443 (browser clients, shares the HTTP/3 listener)

Currently ServeTransportMode is a single enum and Server::run() takes one acceptor. To serve multiple transports, the architecture needs to change.

Option A: Server manages multiple listeners internally.

pub struct Server {
    // Shared state (one copy, shared across all listeners)
    config: Arc<server::Config>,
    dynamic_config: Arc<ArcSwap<DynamicConfig>>,
    connection_limiter: Arc<ConnectionRateLimiter>,
    outbound_proxy: Option<ProxyConfig>,
    sessions: Arc<tokio::sync::Mutex<Vec<ActiveSession>>>,
    shutdown_tx: tokio::sync::watch::Sender<bool>,
    shutdown_rx: tokio::sync::watch::Receiver<bool>,

    // Per-listener state
    listeners: Vec<ListenerConfig>,
}

pub struct ListenerConfig {
    transport: ServeTransportMode,
    listen_addr: SocketAddr,
    stealth: bool,
    // Transport-specific config (TLS cert, iroh relay, etc.)
    tls: Option<TlsConfig>,
    iroh: Option<IrohConfig>,
}

Server::run() spawns one accept loop per ListenerConfig. Each loop constructs its own acceptor and ServerHandler (with the appropriate TransportKind tag), but shares the auth config, connection limiter, and session list. Shutdown signal goes to all loops.

Option B: Caller manages multiple Server instances.

The caller creates N Server objects, each with its own transport. They share Arc<ArcSwap<DynamicConfig>> and Arc<ConnectionRateLimiter> explicitly.

Option A is better because: shared shutdown, shared session tracking, single point for config reload. Option B puts coordination burden on the caller and makes graceful shutdown harder (N independent shutdown channels).

The TLS + WebTransport coexistence question. Both TLS and WebTransport use port 443. WebTransport is HTTP/3 (QUIC), TLS on port 443 is typically TCP+TLS. They can share the port because they're different protocols — QUIC is UDP, TLS-over-TCP is TCP. The kernel routes by protocol. But if both are on 443, the stealth mode protocol detector needs to handle HTTP/3 as well:

Port 443:
  TCP connection → TLS handshake → SSH (existing)
  UDP "connection" → QUIC handshake → WebTransport → stream proxy

This is similar to how iroh-live-relay works: HTTP/3 listener accepts WebTransport sessions, each session opens bidirectional streams that map to internal services.

Config file for multi-transport:

[[listeners]]
transport = "tls"
listen = "0.0.0.0:443"
stealth = true

[listeners.tls]
cert = "/etc/wraith/tls/cert.pem"
key = "/etc/wraith/tls/key.pem"

[[listeners]]
transport = "tcp"
listen = "0.0.0.0:22"

[[listeners]]
transport = "iroh"
iroh_relay = "https://relay.alk.dev"

[[listeners]]
transport = "webtransport"
listen = "0.0.0.0:443"
# WebTransport shares port 443 with TLS because QUIC is UDP, TLS is TCP

[listeners.webtransport]
cert = "/etc/wraith/tls/cert.pem"
key = "/etc/wraith/tls/key.pem"

The [[listeners]] array-of-tables pattern means each listener is an independent config block. The [auth], [forwarding], and [server] sections at the top level are shared — they apply to all listeners.

NAPI multi-transport:

const server = await serve({
  listeners: [
    { transport: 'tls', listen: '0.0.0.0:443', stealth: true, tlsCert: '...', tlsKey: '...' },
    { transport: 'tcp', listen: '0.0.0.0:22' },
    { transport: 'iroh', irohRelay: 'https://relay.alk.dev' },
  ],
  hostKey: hostKeyBuffer,
  authorizedKeys: keysBuffer,
});

Single WraithServer object, single reloadAuth() call affects all listeners.

Transport Kind and WebTransport

The TransportKind enum (currently Tcp | Tls | Iroh) tags each connection so the handler can behave differently per transport. Adding WebTransport to this enum is straightforward — WebTransport connections are identifiable at accept time. The handler behavior is the same (port forwarding only), but the tag enables transport-specific logging and future policy differences (e.g., WebTransport clients can only access wraith-* control channels).

Proposed Solution

Phase 1: Static/Dynamic Split

1. Introduce StaticConfig and DynamicConfig structs
2. Replace Arc<ServerAuthConfig> in ServerHandler with Arc<ArcSwap<DynamicConfig>>
3. Add ConfigReloadHandle with reload(DynamicConfig) method
4. Expose reloadAuth() on the NAPI WraithServer object

Scope: wraith-core auth module + wraith-napi serve module

Risk: Low — internal refactor, no protocol changes

Phase 2: Forwarding Policy

1. Add ForwardingPolicy to DynamicConfig
2. Add policy check to channel_open_direct_tcpip before proxy spawn
3. Expose reloadForwarding() on NAPI WraithServer

Scope: wraith-core handler + wraith-napi

Risk: Low — new check, default-allow preserves current behavior

Phase 3: Config File

1. Add --config <path> CLI flag parsing TOML
2. CLI flags override config file values (same precedence as cargo)
3. Config file only covers static config + initial auth config path
4. Add serde derive to StaticConfig

Scope: wraith-cli (new binary crate) + wraith-core config module

Risk: Medium — new dependency (toml crate), new CLI surface to validate

Phase 4: Client Profiles

1. Add [profiles] section to client config file
2. --profile production loads named profile
3. CLI flags override profile values

Scope: wraith-cli

Risk: Low — convenience layer only

Phase 5: Multi-Transport Listeners

1. Change ServeTransportMode from single enum to Vec<ListenerConfig>
2. Server::run() spawns one accept loop per listener, sharing DynamicConfig
3. Single shutdown signal drains all listeners
4. Add [[listeners]] to config file format
5. NAPI serve() accepts listeners array instead of single transport
6. Add WebTransport to TransportKind enum (initially as a tag only; actual WebTransport acceptor is a separate R&D phase)

Scope: wraith-core serve.rs + wraith-napi + wraith-cli

Risk: Medium — changes the primary API surface of serve(). Backwards compat via accepting both transport: string (single) and listeners: array (multi) in NAPI.

Open Questions

• OQ-CFG-01: Should forwarding rules support per-user scope derived from the authenticated key's metadata (e.g., peer_credentials.metadata.scopes)? Or is a global rules table with principal matching sufficient?

  Global rules with principal matching is simpler and covers most cases. Per-user scope derived from certificates is more granular but requires the server to maintain a mapping from key fingerprint to scope. This mapping comes from the hub's database, not from the SSH protocol. Phase 2 starts with global rules; per-user scope can be added as an extension.

• OQ-CFG-02: Should the config file watch for changes and auto-reload?

  No. File watching is a potential attack vector (symlink races, inotify limitations on network filesystems). The CLI loads once at startup. The NAPI layer reloads explicitly. This is the right model for a security-sensitive tool.

• OQ-CFG-03: Should ArcSwap be the reload primitive, or is RwLock sufficient?

  ArcSwap is the standard pattern for this in Rust network services (arc-swap crate). It provides lock-free reads (the hot path) and atomic writes. RwLock would also work but adds lock contention on reads. The arc-swap dependency is small (~500 lines) and well-maintained. Prefer it.

• OQ-CFG-04: Should TLS and WebTransport on the same port share a single QUIC listener (like iroh Router's ALPN dispatch), or run as separate listeners on the same port?

  They can't conflict because QUIC is UDP and TLS-over-TCP is TCP — the kernel routes by protocol, not by port number. They're naturally separate listeners even on the same port. However, if iroh is also running on the same host, the iroh endpoint already owns a QUIC listener. The WebTransport listener needs its own. Options: (a) share the iroh endpoint's QUIC listener with ALPN dispatch (reuses from_endpoint pattern), (b) separate QUIC listeners on different ports, (c) bind both to 443/UDP — possible if SO_REUSEPORT is used. Needs R&D; defer to WebTransport transport design session.

  Update: WebTransport is out of scope for the current configuration work. It requires a fundamentally different authentication model (HTTP-level API keys/session tokens vs SSH key-based auth). The ServerHandler only knows SSH auth_publickey. WebTransport auth would need its own handler path. This connects to the broader question of whether DynamicConfig.auth should be transport-aware (see OQ-CFG-06). WebTransport transport design is a separate R&D session.

• OQ-CFG-05: Does TransportKind::WebTransport need any handler behavior different from other transports?

  Initially no — all transports get the same port-forwarding-only handler. But WebTransport connections come from browsers, which have different trust assumptions. A future forwarding policy might restrict WebTransport clients to wraith-* control channels only (no arbitrary host:port forwarding). This is a policy question, not a transport question. The TransportKind tag on the handler enables transport-aware policy rules in ForwardingPolicy without changing the handler. Defer to Phase 2 (forwarding policy design).

• OQ-CFG-06: Should the auth layer be transport-aware?

  Currently DynamicConfig.auth is ServerAuthConfig — SSH keys and CAs only. This works for SSH over any transport (TCP, TLS, iroh) because SSH carries its own auth protocol. But non-SSH transports (WebTransport, WebSocket) use HTTP-level authentication (API keys, session tokens in headers/query params). The auth question is: does the same DynamicConfig serve both models, or does each transport carry its own auth config?

  Option A: AuthPolicy contains both SSH auth and API key auth:

  pub struct AuthPolicy {
      ssh: SshAuthConfig,           // for SSH-over-any-transport
      api_keys: Option<ApiKeysConfig>,  // for non-SSH transports
  }
  

  Option B: Auth is per-listener. Each ListenerConfig carries its own auth config appropriate to its transport.

  Option A is simpler for the initial implementation — the SSH auth path is unchanged, and API key auth is additive. Option B is more flexible but duplicates the shared auth state (keys should be reloadable once, not per listener).

  For now, the config architecture should accommodate Option A as a future extension. Phase 1 implements DynamicConfig with SSH auth only. API key auth is added when a non-SSH transport is implemented.

Decisions Required

These decisions will be extracted into ADRs when the architecture is finalized:

1. ADR-020: Static/dynamic config split, ArcSwap<DynamicConfig> for hot-reloadable auth and forwarding policy. Supersedes ADR-011's "no config file" — adds optional config file while preserving programmatic-first API.

2. ADR-021: Forwarding policy with rule-based allow/deny. Default-allow preserves current behavior during migration; default-deny for production deployments.

3. ADR-022: Multi-transport listeners. Server spawns multiple accept loops sharing auth config, session state, and shutdown. Replaces single ServeTransportMode with Vec<ListenerConfig>.

References

• ADR-011 — Programmatic-first API (superseded by ADR-020)
• ADR-012 — Auth key format
• ADR-018 — Control channel routing
• server/handler.rs — Current Arc<ServerAuthConfig> usage
• server/serve.rs — Current single-transport Server::run() accept loop
• auth/server_auth.rs — ServerAuthConfig struct
• auth/keys.rs — KeySource and key loading
• @alkdev/storage/docs/architecture/sqlite-host.md — peer_credentials table schema
• wtransport — Rust WebTransport library (in /workspace/wtransport)
• arc-swap crate — Lock-free read, atomic write for shared state