5 Commits
Author SHA1 Message Date
glm-5.3-flash 986bd13ce7 adr-014: the idle-timeout posture — teardown-governed phases, no protocol-layer idle bound
- ADR-014 accepted (review 002 C-2): the pre-command handshake, the
  BIND quiet wait, and the association lifetime are all
  teardown-governed; the protocol layer never times out (option 1)
- the BIND relationship recorded as same regime (ADR-007 decided one
  phase's ends by designing BIND; ADR-014 records the inherited
  resolution — one principle, not two)
- the doors' accept-path obligations recorded pre-batch-2 (accept-stage
  idle bound, per-credential/per-peer caps, accept-queue bounds);
  revisitable additively (an optional producer-side idle seam would
  be config, not wire)
- spec lines carry the decided posture: wire.md (association-lifetime
  bullet, no-in-band-control bullet, preamble, frontmatter);
  producer.md (the open handler, the local-backend section, decision
  table, frontmatter); overview.md ADR index
- one upstream-fidelity correction: upstream's dial timeout maps to
  0x06 (TTL expired), not 0x01 as the review sketch suggested
- open-questions.md unchanged (C-2 was never tracked there)

Verification: cargo test green (357 passed), clippy -D warnings clean,
fmt clean, cargo doc clean, wasm check + clippy (wasm32) clean
2026-09-24 19:16:30 +00:00
glm-5.3-flash ff81f2d27b producer: the explicit bind-policy gate + the builder-register pin (review-002 C-3, D-2, S-1, N-2)
- C-3: Socks5ProducerBuilder.bind_policy(bool) — the substrate-free
  entry's explicit BIND gate, defaulting to the accept seam's
  presence; seam presence is never the sole gate
- D-2: RegisterMode::ProducerBuilder + an integration test wiring the
  full builder through .register(...) serving all three commands
- S-1: run_datagram_stage's doc names the hot-Ok(None) residual
- N-2: wire.md §UDP ASSOCIATE carries the inline-send backpressure line

Verified: cargo test (352 green), clippy/fmt/doc clean, wasm checks clean.
2026-09-24 18:04:55 +00:00
glm-5.3-flash d530eae5c4 wire: the ASSOCIATE datagram frame codec — frame + DatagramReader (ADR-003)
- frame(addr, payload): [len: u16 BE][addr + data] over
  TargetAddr::to_be_bytes() + payload; the joint bound enforced at
  frame time (checked_add; 65507 + 255-char domain = 65766 > 65535 →
  Oversize) with addr_encoding_len exposed (7 v4 / 19 v6 / 259 max
  domain) and MAX_INNER_LEN pinned
- DatagramReader: incremental reassembly across chunk boundaries
  (split frames, batched frames, partial headers), infallible,
  returning per-frame Results; the addr sub-layout decoded by hand
  (ATYP-keyed, UTF-8-validated) with typed decode errors —
  BadAtyp / ShortAddress / DomainNotUtf8 / EmptyFrame — so the
  producer stage fails the association loud on protocol garbage
  (udp_undecodable_frame_ends_association, POC #2)
- module docs state the framing-once invariant (the egress speaks
  inner bytes; this layer owns the single length prefix — the
  double-framing bug class POC #2 caught), the F-2 invariant at
  payload level (a zero-length payload is a legal empty datagram,
  never EOF; wire len == 0 is unreachable garbage), and the EOF
  layering (the channels-level sentinel, outside the codec)
- doc-sync: wire.md + bast.md residue corrected — "len == 0 is a
  legal empty datagram" replaced with the payload-level F-2
  statement (len == 0 unreachable since addr >= 7 bytes)
- lib.rs re-exports frame, DatagramReader, addr_encoding_len,
  MAX_INNER_LEN, WireError (convention 15)

Verification: cargo test (58 lib + 37 differential), clippy
--all-targets -- -D warnings, fmt --check, doc --no-deps, and both
wasm checks (check + clippy on wasm32-unknown-unknown) — all clean.
2026-09-23 15:02:24 +00:00
glm-5.3-flash 001aac1fd5 docs: the targeted fork — ADR-013, the RFC 1928 core is owned
ADR-013 supersedes ADR-011's maintenance posture (not its mechanics):
the extracted T-generic subset is fully owned code, the vendor
framing is retired. Module renamed src/vendor/ -> src/rfc1928/
(naming decided in the ADR: 'vendor' names an ownership relation
now gone; 'socks5' would stutter and collide with the future
producer/consumer layers). Fork point = the tree as of the
extraction-review commit (5b18d4d); provenance stays permanent
(module docs + the extended LICENSE notice).

- ADR-013: fork posture, license mechanics (notice extended, not
  replaced; post-fork modifications under the crate license),
  hand-port replaces re-vendor, lint-allow posture dissolved
- ADR-011 marked Superseded (extraction mechanics remain
  authoritative); ADR-002 references re-pointed
- vendor.md -> rfc1928.md rewritten as the owned-core spec (the cut
  table re-read as the hand-port map)
- spec sweep: README index (ADR-013 row, doc table, principle 8),
  overview (module map, deps, ADR table), producer/consumer/wire/
  bast reference vocabulary, open-questions OQ-SK-04 resolution,
  AGENTS.md conventions 4/17 + verification note + context bullet,
  Cargo.toml description

Verification: cargo doc --no-deps clean; no stale vendor.md/src-vendor
references outside the ADR-011 historical text.
2026-09-22 12:33:36 +00:00
glm-5.3-flash 9587670138 docs: Phase 1 architecture — specs, ADRs 001-012, open-questions tracker
- docs/architecture/: README index, overview, wire, producer,
  consumer, vendor, bast specs + open-questions.md (the OQ-SK-01..09
  ledger promoted; new questions as OQ-SK2-06..)
- ADRs 001-012: ALPN/op/params, protocol base, the handle swap,
  the dial-callback shape, auth split by the door, access control
  (open gate + BIND command gate), BIND in base, provider defaults,
  feature gates, channel capacity, the inline vendor, target policy
- deferred OQs (SK2-06, SK2-07) with tracker tasks in
  tasks/architecture/ per the sdd_process deferred-OQ protocol
- review pass applied: frame-length joint bound (65766 corner),
  accept_no_auth vs skip_auth corrected against fast-socks5 source,
  composed-feature wasm posture, cross-reference fixes

Verified: cross-references (all ADR/OQ refs resolve), doc sizes
under split threshold, Phase 0 fidelity spot-checks
2026-09-20 18:41:56 +00:00