# ADR-009: The Channels Open Op's `input` Is the Negotiation

## Status

Accepted (2026-09-05). Resolves review #001 L1. Prerequisites: alkcall
0.4.0 (call-time `input_schema` enforcement) and alkcall 0.4.1
(early-arrival parking for un-adopted channels).

## Context

Before this ADR, the channels path carried the negotiation twice. The
consumer opened a channel via the `channels/tty/sub` open op, passing
the `NegotiateRequest` params as the op's `input`; the producer-side
open handler then ignored that `input` (`let _ = input;`) and read a
second, full negotiation frame from the channel's data stream — the
same frame the direct-ALPN path reads. The registry validated `input`
against the op's schema, but the backend selection actually came from
the unvalidated wire frame. Two independent gates (the registry's
schema check on `input` and `drive_session`'s wire-frame parse) could
disagree: a client could pass schema-valid `input` and write a
divergent frame.

Review #001 (L1) flagged this as a latent inconsistency and asked for
a publisher decision: either drop the `input` parameter or pass it
through as the authoritative negotiation. Investigation of alkcall
found the review's premise wrong in an important way — alkcall (≤0.3.1)
never enforced `input_schema` on any dispatch path at all: the schema
was advertise-only (metadata in discovery). The registry gate this
design leaned on did not exist.

Two upstream changes landed to make the design sound:

1. **alkcall 0.4.0** — `OperationSpec.input_schema` is enforced at
   call time by all three registry dispatch entry points (`invoke`,
   `invoke_streaming`, `invoke_sink`). The schema is compiled once at
   registration (fail-closed, the same rule as `publish_schema` /
   CF-003). Violations return `INVALID_INPUT` before the handler runs.
2. **alkcall 0.4.1** — the demux parks early-arrival chunks for a
   not-yet-adopted channel (bounded FIFO, 64 payloads per channel) and
   `adopt_channel` drains them into the new receiver. Before this, the
   open-op-response / producer's-first-write race silently dropped the
   first chunks of any push-first producer. This bug was found by the
   L3 end-to-end test (an immediately-resolving backend's stdout
   sentinel + exit chunk raced the consumer's `adopt_channel`; the
   session never resolved).

## Decision

The open op's registry-validated `input` **is** the negotiation
(design 2 of the L1 decision). The channels path carries **no second
negotiation frame** on the channel's data stream — the stream starts
directly in raw-chunk mode (TTY's 5-byte format, ADR-001/ADR-008).

### Producer side

`make_tty_open_handler` parses the open op's `input` into a
`NegotiateRequest` and drives the new `drive_session_pre_negotiated`
(`src/adapter.rs`) — the same three-pump session driver as the direct
path, minus the wire-frame negotiation phase. Validation is factored
into `validate_and_allocate`, shared by both paths: `carriage ==
"raw"`, non-empty `cmd`, backend lookup, the ADR-050 ownership check,
and `backend.allocate`. On the channels path the `tty:open` scope gate
is NOT re-checked in the handler — the registry's `AccessControl`
enforced it before the handler ran (the identity the registry checked,
resolved from the connection, is the authoritative one; the
handler-side identity is only the ownership-check subject).

Post-open failures (unknown backend, `allocate_failed`, ownership
denial) still go to the client as a `0x00`-prefixed negotiation error
frame on the channel stream — the same framing the direct path uses —
so the consumer's ADR-001 §5 disambiguation read applies unchanged.

A `NegotiateRequest` parse failure of the schema-validated `input`
(the schema is deliberately partial — `carriage`/`backend`/`cmd`
required, `tty`/`cwd`/`env`/backend-params free-form so the opaque
ADR-053 params pass through) is a handler-side failure; the handler
logs and returns without writing an error frame (the channel is torn
down by the wrapper's teardown task).

### Consumer side

`TtySession::open_via_channels` (`src/session.rs`) parses `params` as
a `NegotiateRequest` locally first (fail-fast before a channel is
allocated), opens the channel via `ChannelClient::open_channel`,
builds the channel `Connection`, and starts raw-chunk mode directly
(`from_halves_raw` — no negotiation frame is written). The
`0x00`-error-frame peek is retained: the first byte of the producer's
response disambiguates a post-open negotiation error frame (length
prefix starting `0x00`) from a raw chunk (`stream_type` in `{1, 2, 4}`).

### Scope of the change

- `tty_open_spec()`'s input schema becomes the partial
  `NegotiateRequest` shape (required: `carriage`, `backend`, `cmd`).
- `drive_session_pre_negotiated` is public API (a new producer entry
  point alongside `drive_session`); `validate_and_allocate` is
  private, shared by both drivers.
- The direct-ALPN path is unchanged: it still reads the wire-frame
  negotiation (ADR-001) and enforces the scope gate itself.
- The 5-byte chunk format, the error-frame layout, and the
  `NegotiateRequest` JSON shape are unchanged (ADR-001, ADR-006).
  This ADR removes a frame from the channels data stream; it does not
  change any frame that remains.

## Consequences

**Positive:**

- **One negotiation per session.** The registry's schema check and the
  semantic validation run on the same value — the two-gate
  disagreement is structurally impossible.
- **Fewer bytes and one less round trip** on the channels path: no
  4-byte length prefix + JSON frame on the data stream, and the
  consumer needs no negotiation write before its first read.
- **The consumer's `open_via_channels` fails fast** on malformed
  params before a channel is allocated.
- **`open_via_channels` and `from_bidi_stream_via` are covered
  end-to-end** against the real producer path (review #001 L3): 5
  session tests + a pre-negotiated adapter test + the shared
  `crate::testing` harness (moved out of `channels.rs::tests` so the
  session tests share it).

**Negative:**

- **A second producer entry point.** `drive_session` (direct) and
  `drive_session_pre_negotiated` (channels) must stay in sync on
  validation semantics; the shared `validate_and_allocate` keeps the
  validated logic in one place, but the scope-gate policy differs by
  path (`enforce_scope` flag) and is documented at both call sites.
- **The schema is deliberately partial.** Raw JSON Schema is
  permissive on unknown keys, so the opaque backend params pass
  through unchecked by the registry; semantic validation stays in
  `validate_and_allocate` and the backend's `allocate`. Duplicating
  full `NegotiateRequest` schemas in the spec would create a second
  definition to drift against `negotiation.rs`.
- **Consumer/producer version skew.** A consumer that writes the old
  second negotiation frame to a producer built on this ADR will have
  that frame parsed as a raw chunk (stream_type byte = first JSON
  byte, garbage length) — the session fails confusingly. Acceptable
  pre-1.0 (no released channels-path consumers); the direct path is
  unaffected.

## Door type

**Two-way for now, one-way once a released consumer exists.** The
channels-path negotiation location (open-op `input` vs. a wire frame)
is reversible pre-1.0 — the `NegotiateRequest` shape, the 5-byte chunk
format, and the error-frame layout (the wire-stable contracts) are
untouched. Once a released consumer depends on "open op, then raw
chunks," removing or re-adding the wire-frame negotiation on this path
becomes a peer-breaking change. The `drive_session_pre_negotiated`
public API is additive; `drive_session` is unchanged.

## References

- [ADR-001](001-wire-format-and-two-carriage.md) — the two-carriage
  model (JSON negotiation + raw chunks) and the §5 framing
  disambiguation this ADR reuses for the post-open error frame
- [ADR-002](002-ttybackend-trait-and-ttyhandle.md) — the backend
  selection and allocation this ADR's validation runs
- [ADR-006](006-negotiation-framing-self-contained.md) — the
  negotiation frame layout (unchanged; the direct path still uses it)
- [ADR-008](008-channels-pure-channel-multiplexing.md) — the channels
  layer strips its 8-byte header transparently; TTY owns its framing
  (this ADR decides what TTY's framing on the channels path contains)
- `docs/reviews/001-code-review.md` §"Resolution (2026-09-05, L1 + L3)"
- `src/adapter.rs` — `drive_session`, `drive_session_pre_negotiated`,
  `validate_and_allocate`
- `src/channels.rs` — `make_tty_open_handler`, `tty_open_spec`
- `src/session.rs` — `open_via_channels`, `from_halves_raw`
- `src/testing.rs` — the shared producer/consumer channels harness