reverse-proxy/docs/architecture/operations.md

status, last_updated

status	last_updated
draft	2026-06-11

Operations

What It Is

The operations component covers everything related to running the proxy in production: rate limiting, logging (fail2ban integration), health checks, systemd integration, and graceful shutdown.

Why It Exists

A reverse proxy that can't be monitored, rate-limited, or gracefully restarted is not production-ready. These concerns are cross-cutting — they affect the proxy handler, the TLS layer, and the config system.

Rate Limiting

Requirements

• Limit requests per IP address (replacing nginx's limit_req_zone)
• Default: 10 requests/second with burst of 20 (matching current nginx config)
• Configurable via DynamicConfig (no restart needed)
• Must produce logs that fail2ban can consume

Design

The rate limiter runs as axum middleware before the proxy handler. It uses a token bucket algorithm per client IP, matching nginx's limit_req burst semantics.

Rate limits are global per-IP in Phase 1 (not per-site). A request from IP address X counts against the same bucket regardless of which site it targets. Per-site rate limits may be added in Phase 2.

The token bucket uses nodelay semantics matching nginx's limit_req burst nodelay: when the bucket is empty, the request is immediately rejected with 429 — requests are not queued. Tokens are added at a rate of requests_per_second (1 token every 1000ms / requests_per_second), and the bucket capacity is the burst value.

When a request exceeds the rate limit, the middleware returns 429 Too Many Requests and logs the event with structured fields.

State Eviction

The per-IP token bucket state grows over time as new IPs are seen. A background task runs every 60 seconds (configurable) and removes entries whose last access timestamp is older than a configurable eviction age (default: 300 seconds / 5 minutes). This prevents unbounded memory growth while preserving recent entries that may still receive traffic.

Config Reload Behavior

When rate limit parameters change (e.g., from 10 req/s burst 20 to 20 req/s burst 40), the behavior is:

1. New DynamicConfig is swapped in via ArcSwap.
2. On the next request from an existing IP, the rate limiter reads the current DynamicConfig for rate/burst parameters.
3. The token bucket refills using the new rate, and its capacity is set to the new burst maximum.
4. If the current token count exceeds the new burst maximum, it is capped to the new burst maximum.

The HashMap is not cleared — this avoids creating a rate-limiting gap. Existing buckets adopt new parameters on their next request. The eviction task continues removing stale entries independently.

IPv6 Rate Limiting

IPv6 addresses have a vastly larger address space than IPv4. Rate limiting per individual IPv6 address (/128) is ineffective against attackers who can generate many addresses within a /64 prefix.

• IPv4: Rate limited per individual address (/32).
• IPv6: Rate limited per /64 prefix. All addresses in the same /64 share the same token bucket. This matches RFC 4941 privacy extension boundaries and common anti-abuse practice.

The rate limiter normalizes IPv6 addresses to their /64 prefix before bucket lookup.

Fail2ban Integration

Rate limit events are logged in a structured format that a custom fail2ban filter can parse. See ADR-007 for the format decision.

The log format uses key=value pairs with a RATE_LIMIT prefix:

RATE_LIMIT client_ip=203.0.113.50 host=Y.Z path=/W status=429

A corresponding fail2ban filter and jail configuration are provided as part of the deployment documentation.

Logging

Structure

All logs use tracing with structured fields. The proxy outputs two types of log entries:

1. Access logs: Every proxied request is logged at info level with structured fields.

REQUEST client_ip=203.0.113.50 host=git.alk.dev method=GET path=/user/repo status=200 upstream=127.0.0.1:3000 duration_ms=45

2. Event logs: Rate limits, TLS errors, upstream failures, config reloads, etc.

   RATE_LIMIT client_ip=203.0.113.50 host=git.alk.dev path=/login status=429
   UPSTREAM_ERROR host=git.alk.dev upstream=127.0.0.1:3000 error="connection refused"
   CONFIG_RELOAD status=success sites=1
   

Output

Logs are written to two destinations simultaneously:

• File (primary): /var/log/reverse-proxy/access.log — the authoritative source for fail2ban consumption. File logging is always enabled when the log_file_path config is set. See ADR-020 for the rationale behind file-primary logging.
• stdout/stderr: Always-on, for docker logs, journalctl, and development use. Structured in the same format as the file output.

The tracing-subscriber layer configuration supports both simultaneously via Layer composition.

File Logging and fail2ban

File logging is the primary integration point for fail2ban. A log file on a volume mount is simpler and more reliable than parsing Docker log drivers or journald — no log driver configuration, no format conversion, no risk of dropping events.

In container deployments, the log directory is volume-mounted so fail2ban on the host can read it directly:

volumes:
  - /var/log/reverse-proxy:/var/log/reverse-proxy

A corresponding fail2ban filter definition and jail configuration are provided as part of the deployment documentation.

Log Levels

Level	Use
error	Unrecoverable failures (TLS handshake failure, config validation)
warn	Rate limit exceeded, upstream unreachable, upstream timeout
info	Access logs, config reloads, ACME events, startup/shutdown
debug	Request/response headers, connection details
trace	Detailed protocol-level information

Configurable via log_level in StaticConfig.

Health Check

Local Health Check Port

The primary health check endpoint is served on a separate local port (default: 9900), bound to 127.0.0.1 only. This ensures health checks work even when TLS is misconfigured. See ADR-013 for the rationale.

GET http://127.0.0.1:9900/health → 200 OK (empty body)

The port is configurable via health_check_port in StaticConfig. Setting it to 0 disables the separate health check listener.

HTTPS Health Check (Fallback)

When the local health check port is enabled, /health is also available on the main HTTPS listener for cases where TLS-level health verification is desired. External monitoring should prefer the local health check for liveness checks and can use the HTTPS endpoint for TLS verification.

What It Checks

• Process is running and the tokio runtime is responsive
• TLS listener is accepting connections (HTTPS endpoint only)
• Config is loaded (StaticConfig and DynamicConfig are initialized)

It does not check upstream reachability. The health check answers "is the proxy process healthy?", not "is the upstream reachable?" — upstream health is a separate concern that would produce 502/504 responses in the proxy handler.

Future Extensions

• /health/ready — readiness check that includes upstream reachability
• Prometheus metrics at /metrics

Systemd Integration

The proxy can also run as a bare binary via systemd (alternative to container deployment). The systemd unit file is provided for this use case.

Unit File

[Unit]
Description=Reverse Proxy
After=network.target
Wants=network-online.target

[Service]
Type=notify
NotifyAccess=all
ExecStart=/usr/local/bin/reverse-proxy --config /etc/reverse-proxy/config.toml
Restart=on-failure
RestartSec=5

# Security hardening
NoNewPrivileges=yes
ProtectSystem=strict
ProtectHome=yes
PrivateTmp=yes
ReadWritePaths=/var/lib/reverse-proxy /var/log/reverse-proxy

# ACME challenge cache directory
StateDirectory=reverse-proxy

[Install]
WantedBy=multi-user.target

The proxy signals readiness to systemd via sd_notify after binding listeners and completing the initial configuration load.

Graceful Shutdown

Signal Handling

The proxy handles three signals via signal-hook (see ADR-009):

• SIGTERM / SIGINT: Graceful shutdown. Stop accepting new connections, wait for in-flight requests to complete (up to a configurable timeout), then exit.
• SIGHUP: Config reload. Re-read the config file, validate, and swap DynamicConfig if valid. No feedback on success or failure.
• Admin socket reload: Send reload command via the Unix domain socket (default: /run/reverse-proxy/admin.sock). Returns structured response indicating success or failure. See ADR-014 for details.

SIGHUP for Config Reload

SIGHUP triggers config reload (see config.md for details). The process does not exit on SIGHUP.

Admin Socket for Config Reload

The admin Unix domain socket provides programmatic config reload with feedback. This is useful for CI/CD pipelines and automation tools. See ADR-014 for the rationale.

Protocol:

• Connection lifecycle: One command per connection. Client connects, sends one newline-terminated command, receives one newline-terminated JSON response, then the server closes the connection.
• Message framing: Newline-delimited (\n). Responses end with \n.
• Commands:
  • reload — Re-read config file, validate, and swap DynamicConfig. Returns {"status": "ok"} or {"status": "error", "message": "..."}.
  • status — Return basic process info. Returns {"status": "ok", "uptime_secs": 1234, "sites": 2}.
• Error responses: Unrecognized commands return {"status": "error", "message": "unknown command: <cmd>"}. Invalid or empty input returns {"status": "error", "message": "invalid input"}.
• Concurrency: Multiple clients can connect simultaneously, but reload operations are serialized (see Config Reload section in config.md).
• Socket cleanup: The proxy removes any existing socket file at startup before binding. If the file exists and another process is listening, a warning is logged and the admin socket is disabled (but the proxy continues starting).

Shutdown Sequence

On SIGTERM or SIGINT, the proxy performs a graceful shutdown:

1. Stop accepting new connections — Close all TCP listening sockets. No new connections are accepted.
2. Close idle keep-alive connections — Send Connection: close on any idle connections in the keep-alive pool.
3. Wait for in-flight requests — Up to shutdown_timeout_secs (default: 30) for active requests to complete.
4. Force-close remaining connections — After the timeout, any remaining connections are forcefully closed via TCP RST.
5. Cancel background tasks — ACME renewal tasks, rate limiter eviction task, and admin socket listener are all cancelled.
6. Exit with code 0.

The shutdown_timeout_secs is configurable in StaticConfig (default: 30 seconds). See config.md for details.

Deployment

Binary

Single static binary, no runtime dependencies:

cargo build --release
# Produces: target/release/reverse-proxy

The binary is self-contained — no system libraries beyond libc for DNS resolution. The aws_lc_rs crypto provider is statically linked.

Configuration

# Config file
/etc/reverse-proxy/config.toml

# ACME cache directory
/var/lib/reverse-proxy/acme-cache/

# Log directory (optional, for fail2ban)
/var/log/reverse-proxy/

CLI

reverse-proxy [OPTIONS]

Options:
  --config <PATH>      Path to config file [default: /etc/reverse-proxy/config.toml]
  --validate          Validate config and exit
  --allow-wildcard-bind  Permit 0.0.0.0 as a bind address (for container deployments)
  --help              Show help
  --version           Show version

Container Deployment

Rationale

The proxy runs in a minimal Docker container for defense-in-depth. Even if an attacker finds a logic-level vulnerability, they must also escape the container boundary. Combined with Rust's memory safety, this provides two independent barriers against exploitation. See ADR-020 for the full rationale.

Container Image

Multi-stage build: compile in rust:alpine, run in alpine (or scratch for absolute minimum). The final image contains only the static binary and necessary runtime files. No shell, no package manager, no unnecessary tools.

The binary is compiled against the x86_64-unknown-linux-musl target for static linking. The aws_lc_rs crypto provider is statically linked — no OpenSSL dependency.

Networking

The proxy supports flexible upstream addressing — no assumption about upstream localality:

Deployment	Upstream Address	Example
Same-host, shared Docker network	Docker DNS name	gitea:3000
Same-host, host networking	Loopback	127.0.0.1:3000
Different host, LAN	LAN IP	10.0.0.5:3000
Different host, VPN/tunnel	Tunnel endpoint	Varies by tunnel config

In container deployments, the proxy binds 0.0.0.0 inside the container and Docker publishes specific ports to the host IP. The allow_wildcard_bind override is required for this configuration (see ADR-016, ADR-020).

Volume Mounts

Container Path	Host Path	Purpose
/etc/reverse-proxy/config.toml	Config file (read-only)	Proxy configuration
/var/lib/reverse-proxy/acme-cache/	ACME state directory	Certificate persistence across restarts
/var/log/reverse-proxy/	Log directory	fail2ban reads from host
/run/reverse-proxy/admin.sock	Admin socket	Host-side config reload commands

Docker Compose Example

This example shows the reverse proxy alongside a Gitea container on a shared Docker network. Real IPs, secrets, and domain names are replaced with placeholders.

services:
  reverse-proxy:
    build: .
    container_name: reverse-proxy
    restart: unless-stopped
    ports:
      - "203.0.113.10:80:80"     # HTTP redirect
      - "203.0.113.10:443:443"   # HTTPS
    volumes:
      - /etc/reverse-proxy/config.toml:/etc/reverse-proxy/config.toml:ro
      - /var/lib/reverse-proxy/acme-cache:/var/lib/reverse-proxy/acme-cache
      - /var/log/reverse-proxy:/var/log/reverse-proxy
      - /run/reverse-proxy:/run/reverse-proxy
    networks:
      - proxy-net
    healthcheck:
      test: ["CMD", "wget", "-q", "--spider", "http://127.0.0.1:9900/health"]
      interval: 30s
      timeout: 5s
      retries: 3

  gitea:
    image: gitea/gitea:latest
    container_name: gitea
    restart: unless-stopped
    ports:
      - "203.0.113.10:22:2222"    # Git SSH
    volumes:
      - /opt/gitea:/data
    networks:
      - proxy-net
      - gitea-db-net

  gitea-db:
    image: postgres:16-alpine
    container_name: gitea-db
    restart: unless-stopped
    environment:
      POSTGRES_USER: admin
      POSTGRES_PASSWORD: ${DB_PASSWORD}
      POSTGRES_DB: gitea
    volumes:
      - gitea-db:/var/lib/postgresql/data
    networks:
      - gitea-db-net

networks:
  proxy-net:
  gitea-db-net:

volumes:
  gitea-db:

Corresponding proxy config (inside the container):

allow_wildcard_bind = true
health_check_port = 9900
admin_socket_path = "/run/reverse-proxy/admin.sock"

[logging]
level = "info"
format = "text"
log_file_path = "/var/log/reverse-proxy/access.log"

[rate_limit]
requests_per_second = 10
burst = 20

[body]
limit_bytes = 104857600

[[listeners]]
bind_addr = "0.0.0.0"
http_port = 80
https_port = 443

[listeners.tls]
mode = "acme"
acme_domains = ["git.example.com"]
acme_cache_dir = "/var/lib/reverse-proxy/acme-cache"
acme_directory = "production"

[[listeners.sites]]
host = "git.example.com"
upstream = "gitea:3000"    # Docker DNS resolves this

fail2ban Integration

In container deployments, fail2ban runs on the host and reads the proxy's log file from the volume mount:

/var/log/reverse-proxy/access.log  →  fail2ban filter  →  iptables/nftables

This is simpler and more reliable than parsing Docker log drivers. The log file is the authoritative source for rate limit events and access logs.

Health Check

Docker's native HEALTHCHECK uses the local health endpoint:

HEALTHCHECK --interval=30s --timeout=5s --retries=3 \
  CMD wget -q --spider http://127.0.0.1:9900/health || exit 1

No port publishing is needed — the health check runs inside the container.

SSH Traffic

SSH traffic for Git operations is not proxied through the reverse proxy. It continues to be routed directly to the Gitea container via Docker port publishing (e.g., 203.0.113.10:22:2222), matching the current deployment pattern.

Startup Sequence

The proxy starts components in a specific order to ensure fail-fast behavior and correct dependency initialization:

1. Parse and validate config — Read the TOML config file, deserialize into StaticConfig and DynamicConfig, and validate all rules. If validation fails, exit with non-zero code and log errors. No ports are bound.

2. Initialize DynamicConfig — Load sites, rate limits, and body limits into ArcSwap<DynamicConfig>.

3. Initialize shared state — Create the rate limiter HashMap<IpAddr, TokenBucket>, the shared hyper::Client, and the tracing-subscriber with file and stdout layers.

4. Bind health check port (if enabled) — Bind 127.0.0.1:{health_check_port}. Fail-fast if bind fails.

5. Bind admin socket (if enabled) — Remove any stale socket file first, then bind the Unix domain socket. If the socket file exists and another process is listening, log a warning and fail the admin socket (but continue starting — the admin socket is non-critical).

6. Bind all listener ports — For each listener: bind HTTP port (if enabled) and HTTPS port. If any bind fails, fail-fast and exit. All ports are bound before proceeding.

7. Load TLS configuration — For each listener: load manual certificates or initialize ACME state machine. If manual certificate loading fails, fail-fast and exit. For ACME: if no cached certificate exists and ACME provisioning fails, fail-fast and exit.

8. Start TCP listeners — Begin accepting connections on all bound ports.

9. Start background tasks — ACME renewal tasks (per listener in ACME mode), rate limiter eviction task, signal handler task, admin socket handler task.

10. Signal readiness — Send sd_notify("READY=1") to systemd (if running under systemd).

Failure semantics: Fail-fast. If any step fails, the process exits with a non-zero code. The proxy does not partially start. All ports are bound before any connections are accepted.

Design Decisions

All design decisions are documented as ADRs in decisions/.

ADR	Decision	Summary
001	Rust with axum	Memory safety; single binary deployment
006	Token bucket rate limiting	In-memory per-IP token bucket matching nginx burst semantics
007	Custom structured log format	key=value pairs with RATE_LIMIT prefix for fail2ban
009	Signal handling strategy	signal-hook for SIGTERM/SIGINT/SIGHUP
013	Health check on separate local port	Localhost-only HTTP health check, configurable port
014	Unix domain socket config reload API	Programmatic reload with success/failure feedback
020	Container deployment model	Defense-in-depth via container isolation; file-primary logging

Open Questions

Open questions are tracked in open-questions.md. Key questions affecting this document:

• OQ-03: Should the health check endpoint be on a separate port? (resolved — ADR-013: separate local port, default 9900, localhost only)