alktunnels/docs/research/poc-summary.md

---
status: complete
last_updated: 2026-09-07
---

# alktunnels: UDP Tunnel POC Research Summary

**Status:** Research complete — the producer/consumer shape validated
end-to-end over alkcall 0.5.0 channels, including the ADR-049
establishment phase and the codec decision (raw pass-through for TCP,
`[len: u16 BE]` for UDP). 17 tests pass (7 codec + 10 integration);
clippy `-D warnings` clean; fmt clean. The remaining unknowns are
spec-scope (Phase 1 ADRs), not feasibility. Both upstream findings
below landed in alkcall 0.6.0 (review 007) — see §Resolutions
2026-09-07.
**Date:** 2026-09-06 (resolutions added 2026-09-07)
**Scope:** Validates the OQ-TN-10 #1 POC (UDP tunnel) — plus the
consumer-side of the establisher hand-off (ADR-049), the two-pump
pump-handler contract's `JoinHandle` semantics (a real finding — see
§Issues Surfaced), and the OQ-TN-05 "no backend trait for stream
substrates" judgment in executable form.

---

## Executive Summary

A POC (`alktunnels-udp-poc`, `/workspace/alktunnels-udp-poc`)
validated the alktunnels producer/consumer shape end-to-end:

1. **The producer shape** — `channels/tunnel/sub` open op registered
   via `ChannelCore::register_openable_with_establisher` (ADR-049):
   the establisher validates params semantically (registry lookup of
   `{resource, substrate}` → backing address, producer-side), dials
   the substrate (TCP connect / UDP connect), and delivers the dialed
   handle to the pump handler via a handoff; the wrapper replies only
   after establishment. A refused dial is a typed
   `channel:open_failed` call error with
   `details.reason ∈ {unknown_resource, dial_failed, resource_shortage}`
   — the SSH contract consumer-visibly, verified from the consumer
   side (`TunnelSession::open` resolving `Err` with the reason).
2. **The two-pump data plane** — the pump handler accepts the
   channel's yield-once `BiStream`, splits it, and runs two
   `tokio::io::copy` pumps with shutdown-on-completion (alknet ADR-078)
   against the substrate halves. 1 MiB round-trips through the
   two-pump shape with the bounded-buffer backpressure path intact.
3. **The codec decision** — raw pass-through for TCP (zero
   tunnel-level framing; the channels 8-byte header is the only
   overhead) and `[len: u16 BE][datagram]` for UDP (2 bytes/datagram).
   Datagram boundaries survive chunk splitting, batching, and empty
   datagrams (`len=0`) are legal payloads, NOT EOF — the EOF sentinel
   lives at the channels layer (`BiStream` EOF) and the two never
   collide (different layers).
4. **The consumer shape** — `TunnelSession::open` →
   `ChannelClient::open_channel` → split the channel `BiStream` →
   present raw halves (TCP) or framed datagrams (UDP). One session =
   one channel = one tunnel; the channel ID is the flow key (no
   conn-id — OQ-TN-02 resolution holds).

**17 tests pass** (7 wire codec + 10 integration: TCP echo, TCP 1 MiB,
UDP boundary preservation incl. empty datagrams, UDP-through-chunk-
splitting at the codec level, establisher unknown-resource +
dial-failure typed errors, scope-gate FORBIDDEN, TCP+UDP concurrent
channels on one connection). Clippy clean, fmt clean.

---

## What was built

```
alktunnels-udp-poc/
  Cargo.toml        — alkcall 0.5.0; tokio wasm-clean subset + net (POC-local)
  src/
    lib.rs          — module docs; the POC overview
    params.rs       — TunnelParams {resource, substrate} (the OQ-TN-01 shape)
    wire.rs         — the codec: frame_datagram / DatagramReader
                      ([len: u16 BE] framing; incremental decode across
                      chunk boundaries; len=0 = empty datagram, not EOF)
    producer.rs     — tunnel_open_spec (scope-gated, Sub-typed, channel_open
                      marker), tunnel_establisher (registry lookup + dial +
                      handoff), HandleHandoff (resource-keyed), pump_halves
                      (the ADR-078 two-pump shape, generic over halves),
                      make_tunnel_pump_handler (the OpenHandler),
                      register_tunnel_openable (the wiring), UdpHalf
                      (UdpSocket as AsyncRead/AsyncWrite halves)
    consumer.rs     — TunnelSession (typed client): open / stream_halves /
                      send_datagram / recv_datagram / take_halves;
                      establishment_reason (the ADR-049 typed-error branch)
    harness.rs      — wire_tunnel (the alktty testing.rs pattern: duplex
                      transport, ChannelsAdapter, install_channel_zero hook,
                      register_tunnel_openable on the hook's registry,
                      tunnel_identity with the tunnel:open scope)
  tests/
    tunnel_poc.rs   — the 10 integration tests
```

The POC follows the `alknet-channels-poc` convention: standalone crate
in the workspace root, findings written back into the consuming
crate's `docs/research/`.

## Key findings

### 1. The OpenHandler JoinHandle contract — the pump handler MUST return the pump's own handle

The most important finding of the POC, and it was found by the POC
hanging, not by reading: **the `OpenHandler`'s returned `JoinHandle`
is the wrapper's teardown signal.** The wrapper (`run_open_wrapper`)
awaits it, then tears the channel down (drop the demux sender → EOF to
the handler's read half → the pumps exit). A handler that spawns the
pump as a *nested* task and returns the outer handle immediately
completes the wrapper's await at birth → teardown → both pumps see
instant EOF with zero bytes — every tunnel appears to "connect and
instantly close" while everything upstream looks healthy.

```rust
// WRONG — outer task returns immediately; wrapper tears down at birth:
tokio::spawn(async move {
    let bidi = conn.accept_bi().await?;
    tokio::spawn(pump_halves(bidi, read, write)); // fire-and-forget
    // <- handler ends here; wrapper's raw_task.await resolves NOW
})

// RIGHT — the returned JoinHandle tracks the pump's lifetime:
tokio::spawn(async move {
    let bidi = conn.accept_bi().await?;
    let _ = pump_halves(bidi, read, write).await; // awaited inline
})
```

This is an API-sharpness finding for alkcall (the `OpenHandler`
contract's `JoinHandle` semantics are load-bearing and undocumented —
the type docs say "so the wrapper can record it for teardown (abort on
channel/close / connection drop)" but not that an early return *is*
an early teardown). Worth an upstream doc note; the shape itself is
correct. Filed as a follow-up for the alkcall review ledger.

The pump shape itself (ADR-078) is unchanged and correct: each pump
shuts down the opposite sink on completion; `tokio::join!` on the two
pumps; the wrapper's teardown on pump completion drops the opposite
direction's sender — half-open semantics fall out naturally (one
direction EOFs, the other keeps pumping until its own EOF).

### 2. The establisher hand-off works; its shape is POC-grade only

The ADR-049 amendment says the establisher gets `(input, auth)` only —
the channel's `BiStream` belongs to the pump handler. The POC's
`HandleHandoff` (a `Mutex<HashMap<resource, SubstrateHandle>>` + poll
loop in `take`) works because the wrapper *guarantees* ordering: the
establisher is awaited before the reply, and the pump handler is
spawned after. The delivery is therefore always-before-take.

But the resource-keyed map is a POC simplification that only works for
one open per resource at a time (concurrent opens of the same resource
would race the slot). The real crate's mechanism should be the
ADR-049 reserved extension point: **`Establishment` should carry the
channel plan** (the struct is already documented as "Reserved for a
channel plan — today the wrapper consults only success/failure"). When
alkcall extends `Establishment` to carry data, the handoff mechanism
dies entirely and the establisher returns the dialed handle in its
result. That is the recommended upstream evolution (small, additive —
`Establishment {}` → `Establishment { plan: Option<Value> }` or a
generic), and it removes the last awkwardness of the establisher
shape. Filed as a follow-up for the alkcall ledger.

### 3. The codec decision holds exactly as designed

- **TCP: raw pass-through.** The consumer writes bytes into the
  channel halves; the producer's pump copies them to the TCP socket.
  Zero tunnel-level framing; the only wire overhead is the channels
  8-byte header per chunk. The 1 MiB test exercises bounded buffers
  end-to-end with no deadlock (the alknet-channels POC's
  `tunnel_large_payload` result reproduces on alkcall 0.5.0).
- **UDP: `[len: u16 BE]` framing.** `DatagramReader` is an
  incremental decoder — datagrams split across chunks, datagrams
  batched in one chunk, partial headers, and empty datagrams all
  round-trip (verified at the codec level with maximally awkward
  7-byte chunk splits, and end-to-end through the channels stack).
- **Sentinel layering verified:** `len == 0` in the codec is an empty
  datagram (DNS-over-TCP-style; round-trips through a UDP echo);
  EOF is the channels-level `length=0` chunk on the `BiStream`. The
  two coexist without ambiguity — the consumer's `recv_datagram`
  returns `None` only on stream EOF, never on an empty datagram.
  **Mandate strengthened 2026-09-07** (reverse POC F-2): without the
  codec (raw pass-through), an empty datagram IS a zero-byte read —
  colliding with EOF at the pump level. UDP must ride the codec.
- **MTU discipline:** the codec rejects >65535 at frame time; the
  1400-byte (max ethernet MTU payload) datagram round-trips through
  the bounded-buffer path. The E-04 64-parked-chunks bound was noted
  as a sizing constraint; the POC's datagram sizes stay far below it
  per channel.

### 4. The typed establishment contract is consumer-visible and complete

The consumer branches on `ChannelOpenError::CallFailed { error }`:
`error.code == "channel:open_failed"` with
`details.reason` ∈ `{unknown_resource, dial_failed, resource_shortage}`
(from the establisher) — plus the wrapper-level `timeout` reason and
the pre-allocation failures (`FORBIDDEN` for the scope gate,
`channel:too_many_channels` for the cap). All verified in tests:

- unknown resource → `unknown_resource` (the "ghost" test)
- dial to a closed port → `dial_failed` (the "dead" test)
- scope-less identity → `FORBIDDEN` (the "mallory" test)

The SSH contract holds end-to-end: a failed open never returns a
`channel_id`; the consumer's session never half-exists.

### 5. Stream substrates need no backend trait (OQ-TN-05, executable confirmation)

`pump_halves` is generic over `(AsyncRead, AsyncWrite)` halves. TCP
contributes `OwnedReadHalf`/`OwnedWriteHalf` (`TcpStream::into_split`);
UDP contributes `UdpHalf` (the POC's `UdpSocket` adapter — `poll_recv`
as `AsyncRead`, `poll_send` as `AsyncWrite`, connected-socket
semantics). The pump never knows which. The "backend" question
collapses to "produce boxed halves for a resource" — a function, not a
trait, for everything the producer dials. The remaining OQ-TN-05
question (whether the *hub's* re-produce proxy needs a trait) is
unaffected by this finding; it was always about composition, not
substrate access.

## Issues surfaced (for the spec / upstream)

1. **`OpenHandler` JoinHandle semantics are undocumented and
   load-bearing** (alkcall). The wrapper's teardown-on-handler-exit is
   the intended contract, but nothing in the type docs warns that an
   early return = teardown-at-birth. Recommend: a doc note on
   `OpenHandler` and `ChannelCore::register_openable*` ("the returned
   JoinHandle must track the data-plane lifetime; returning early
   tears the channel down"), possibly a debug-level warning when the
   wrapper's awaited handler exits without having accepted the
   channel's `BiStream`. → alkcall review ledger.
2. **`Establishment` should carry the channel plan** (alkcall). The
   struct is already documented as reserved for it. With `plan`
   carrying the dialed handle (or any established state), the
   establisher→handler handoff becomes a return value instead of a
   side-channel. Unblocks concurrent same-resource opens and removes
   the POC's poll-loop take. → alkcall review ledger (additive,
   two-way door).
3. **`UdpHalf` truncation semantics** (alktunnels spec): `poll_recv`
   into a smaller caller buffer truncates the datagram silently
   (UDP semantics). For well-formed peers the codec's MTU bound makes
   this unreachable; the Phase 1 spec should pin whether the real
   crate's UDP adapter errors on truncation instead (fail loud) —
   recommend erroring, since truncation would corrupt the length-
   framed stream invariants. → Phase 1 ADR note.
4. **Consumer-side pump symmetry** (alktunnels Phase 1): the consumer
   mirrors the producer's pump shape (`tokio::io::copy` between
   local substrate and channel halves, shutdown-on-completion). The
   POC's `TunnelSession::take_halves` exists precisely so the assembly
   layer can pump generically — the OQ-TN-06 helper extraction
   question can now be evaluated with both shapes in hand (producer
   `pump_halves`, consumer `take_halves` + copy): they are the same
   shape modulo channel side. The convergence test alknet ADR-078
   asked for is satisfied.

## Resolutions 2026-09-07 (alkcall 0.6.0, review 007)

Both upstream findings above landed, with deviations recorded in the
review and ADRs:

1. **JoinHandle semantics (→ R-02)** — documented on the `OpenHandler`
   type and both `register_openable*` methods: the returned
   `JoinHandle` must track the data-plane lifetime; the wrapper awaits
   it and its completion triggers channel teardown. Plus the POC's
   second ask: a yield-once acceptance flag in
   `ChannelBidiStreamSource` and a `debug!` birth-teardown hint in the
   teardown task, so the hang-this-POC-found shape is diagnosable at
   runtime, not just in docs.
2. **`Establishment` carries the plan (→ R-01)** — filled as
   `Establishment { plan: Option<ChannelPlan> }` with
   `Establishment::new(plan)`; **typed-opaque** (`ChannelPlan =
   Arc<dyn Any + Send + Sync>`), not the `Option<Value>` sketch here —
   the payloads are live handles (dialed sockets, TTY handles) with no
   JSON representation. The `OpenHandler` gains a `plan` parameter and
   the wrapper threads it. The POC's `HandleHandoff` side-channel and
   its same-resource race are dead: the establisher returns the dialed
   handle directly (`Ok(Establishment::new(dialed))`). **Confirmed
   under concurrency 2026-09-07** by the reverse-flow POC
   (`reverse-poc-summary.md`): two concurrent opens of the same
   resource, distinct channels, distinct dialed handles — the race
   this handoff had is structurally gone. (F-1 there: plan payloads
   must be `Send + Sync`.)
3. **Two-pump helper (→ R-03, bonus)** — `alkcall::channels::pump_bidi`
   pinned upstream (ADR-050), with `(u64, u64)` copy counts (no
   `io::Result` — errors are EOF-shaped per the ADR-078 contract). The
   POC's `pump_halves` shape converged and became the helper; Phase 1
   consumes it instead of hand-rolling.

## What the POC does NOT validate

1. **Real transports** — `tokio::io::duplex` stands in for
   TCP/TLS/QUIC. The alkcall layer owns transport; unchanged from the
   alknet-channels POC scope.
2. **Unix-socket and stdio substrates** — the OQ-TN-10 #3 "cheap"
   item. The pump is substrate-agnostic by construction (finding #5);
   these are wiring, not mechanics. Fold into the real crate's test
   suite rather than a separate POC. (Phase 1 resolution: unix in via
   the `local` feature; stdio OUT — alktty's pipe mode owns process
   stdio. OQ-TN-14.)
3. **The reverse-flow (`-R`) advertisement** — OQ-TN-10 #2 remains
   open; the SSH `tcpip-forward` template in the survey is the
   lifecycle shape to validate there.
4. **Relay traversal** — hub relay (alkcall ADR-042) forwards data
   channels byte-for-byte; the POC's single-hop shape is what
   relays see per leg. The terminate-and-re-produce hub proxy (the
   hub model) is an assembly-layer concern.
5. **Multi-endpoint UDP gateway resources** — the udpgw-shaped
   framing-inside-a-channel variant (OQ-TN-02's "split by path"
   dynamic half). Not a v1 base-protocol concern; the codec keeps the
   door open (framing inside datagram payloads, self-describing).
6. **Wasm** — the POC uses `tokio/net` for real sockets; the
   wasm-clean story is for the real crate's protocol-only core (the
   codec and pump are pure byte/async work; `UdpHalf` and the dial
   paths are the feature-gated parts). Not exercised here.

## Test coverage

```
running 7 tests (src/wire.rs)
test wire::tests::datagram_split_across_chunks ... ok
test wire::tests::empty_datagram_round_trips_and_is_not_eof ... ok
test wire::tests::frames_and_parses_single_datagram ... ok
test wire::tests::oversize_datagram_is_rejected_at_frame_time ... ok
test wire::tests::partial_header_waits ... ok
test wire::tests::mid_datagram_state_is_observable ... ok
test wire::tests::two_datagrams_in_one_chunk ... ok

running 10 tests (tests/tunnel_poc.rs)
test tcp_tunnel_echo_round_trip ... ok
test tcp_tunnel_large_payload_round_trip ... ok          (1 MiB)
test udp_tunnel_round_trip_preserves_boundaries ... ok   (incl. empty dg)
test udp_empty_datagram_round_trips ... ok
test udp_datagrams_survive_chunk_splitting ... ok        (100 dgs, 7-byte chunks)
test establisher_failure_is_typed_open_failed_no_phantom_channel ... ok
test establisher_dial_failure_reports_dial_failed ... ok
test open_without_scope_is_forbidden ... ok
test udp_large_datagram_through_bounded_buffers ... ok   (1400 B)
test udp_and_tcp_concurrent ... ok
```

## References

- alkcall 0.5.0 — ADR-049 (establishment phase),
  `ChannelCore::register_openable_with_establisher`,
  `OpenEstablisher`/`Establishment`/`EstablishmentError`,
  `ChannelOpenError` (typed client error), `run_open_wrapper`
  (`src/channels/operations.rs`). **0.6.0 supersedes parts:** ADR-049
  amendment 2 (`Establishment.plan`), ADR-050 (`pump_bidi`), review
  007 (filed from this POC, all units landed).
- alknet ADR-078 — the two-pump shutdown-on-completion contract;
  `pump_halves` is its direct implementation.
- alktunnels `docs/research/phase-0-findings.md` — the OQ ledger this
  POC closes items against (OQ-TN-01 params shape, OQ-TN-02 split by
  path, OQ-TN-05 halves-not-trait, OQ-TN-09 ADR-049 supersession,
  OQ-TN-10 #1).
- `docs/research/ssh-socks5-survey.md` — the reason-code vocabulary
  the establisher errors surface as.
- alktty `src/testing.rs` — the harness pattern this POC's
  `wire_tunnel` mirrors.
- tun2proxy `src/udpgw.rs` — the framing precedent the UDP codec
  improves on (no CONN_ID, no FLAGS; boundary framing only).